Delta DOP-105CQ Instruction Sheet page 2

(6) Hardware specifications
Model DOP-105CQ
Panel type 5.6" TFT LCD (65536 colors)
Resolution 320 x 234 pixels
LED backlight
Backlight
Display
(half-life under room temperature 25°C > 20,000 hours)
Display
113.28 x 84.70 mm
range
Brightness 200 cd/m² (Typ.)
CPU ARM Cortex-A8 (800 MHz)
Flash ROM 256 Mbytes
RAM 256 Mbytes
Touchscreen 4-wire resistive touchscreen > 10,000,000 operated
Buzzer Multi-tone frequency (2 - 4 kHz) / 80 dB
Network interface
USB 1 USB slave Ver 2.0; 1 USB host Ver 2.0
SD
COM1 RS-232 (supporting flow control)
Serial
communication
COM2 RS-232 / RS-485
port
COM3 RS-422 / RS-485
Auxiliary function key
Calendar
Cooling method Natural cooling
Approvals (please use shielding network cable and magnetic ring with the
filter of 300 ohm / 100 MHz)
Panel waterproof level IP65 / NEMA4 (indoor use only)
DC +24V (-15% to +15%)
(please use an isolated power supply)
Operation voltage *2
(Supplied by Class 2 or SELV circuit (isolated from MAINS by double
insulation))
Leakage current 500 V for 1 minute (between DC24V terminal and FG terminal)
AC
*3
Power consumption 6.86 W (Max)
Backup battery 3V lithium battery CR2032 × 1
About 3 years or more at 25°C (77°F)
Backup battery life
(subject to operation temperature and condition)
Operation temperature 0°C to 50°C (32°F to 122°F)
Storage temperature -20°C to +60°C (-4°F to 140°F)
10% to 90% RH [0 to 40°C (32 to 104°F)],
Operating environment 10% to 55% RH [41 to 50°C (105.8 to 122°F)];
pollution degree: 2
Conforms to IEC61131-2: continuous vibration 5 Hz - 8.3 Hz with
Vibration resistance
amplitude 3.5 mm; 8.3 Hz - 150 Hz with amplitude 1G
Conforms to IEC60068-2-27: 11 ms, 15 G Peak, in X, Y, Z
Shock resistance
directions each for 6 times
Dimensions
184 x 144 x 50
(W) x (H) x (D) mm
Mounting dimensions
172.4 x 132.4
(W) x (H) mm
Weight Approx. 670 g
Note:
1. The half-life of the backlight is defined as the maximum luminance being reduced by 50% when the
maximum drive current is supplied to the HMI. The life of LED backlight shown here is estimated at
the room temperature of 25°C (77°F) with ambient humidity.
2. The withstand voltage of the isolated power circuit is 1500 V peak for 1 minute.
3. The HMI power consumption is the power consumed when the HMI is not connecting with other
peripheral devices. To ensure normal operation of the HMI, the recommended capacity of the power
supply is 1.5 to 2 times of the specified power consumption.
4. Isolated power supply is recommended.
5. For the programming software DOPSoft of DOP-100 series and its user manual, you can download
them at http://www.delta.com.tw/ia.
6. DOP-100 series can be used with other industrial automation equipment. Please read through this
sheet carefully and install the product according to the instructions to avoid danger.
*1
N/A
N/A
*2
*2
*2
N/A
Built-in
CE / UL
*3