Page 1
Tamper REX 1 Arming Reader 1 Door Mon 1 Arming Reader 2 Fire Alarm Door 2 inputs (Note 4) REX 2 Door Mon 2 Input 5 V+ (12v) Note 2 Input 6 Input 7 Clock/D1 Input 8 Data/D0 Note 1 Capture 12v Out Tamper / Door 1 Fault...
Page 2
Notes: The reader wiring shown is for a standard format Nortech reader (MP1-EM1-0000) configured for Wiegand format. For other readers, refer to the reader manual. The power supply to readers at the reader interfaces is fixed at 12v dc. Ensure that this is appropriate for the reader(s) that you wish to connect to the controller.