Advertisement
Remember that the bulb and mesh cover will be hot during and after use.
Use gripper on secure, non-flammable supports only.
If the lamp uses a clamp to hang it during use, ensure the object to which you clamp the spring-clip is suitable for the task.
DO NOT allow children near the lamp.
DO NOT use the lamp near flammable, combustible or explosive liquids, solids, gases or equipment.
When not in use disconnect the lamp from the power source, ensure the unit is cool and dry then store in a safe, dry, childproof area.
2.
INTRODUCTION
Incandescent lead lamp. Handle incorporates on/off switch and spring loaded gripper. Casing includes ball-mounted hook and hinged
mesh cover which protects bulb and reflector.
3.
OPERATING INSTRUCTIONS
ML60GP-60W/230V
3.1.
BULB CHANGING.
WARNING! Disconnect the lamp from power source, allow lamp to cool before attempting to change the bulb.
3.1.1. Bulb (fig.1.2). To gain access to the bulb, press the plastic tab (fig.1.3) inward and slide the lock (fig.1.4) upwards in order to release
the mesh cover.
3.1.2. Remove the old bulb by pushing down into lampholder and rotate anti-clockwise. Hold the new bulb in a clean cloth, push down and
rotate clockwise.
(Always use the correctly rated bulb).
3.1.3. GENERAL
Clean the lamp with a dry, dust-free cloth. DO NOT use solvents, or abrasives to clean the lamp.
Fig.1.
3.2.
ML6012GP-60W/12V.
Connect to a power supply as follows:
3.2.1. Vehicle cigarette lighter socket:
To avoid a short circuit, Isolate each battery clamp (fig.2.1.) individually by placing into supplied holster (fig.2.2).
Push lighter plug (fig.2.3) into the cigarette lighter socket, switch the rocker switch on the lamp body (fig.1.6) to 'ON'.
3.2.2. Connect to a 12V vehicle battery:
To avoid a short circuit, isolate the cigarette plug (fig.2.3) by placing it in the supplied holster (fig.2.4).
Connect the RED clamp (+) positive to the battery positive terminal, and BLACK clamp (-) negative to negative
battery terminal. Switch the rocker switch on the body to 'ON'.
4.1.
BULB CHANGING.
WARNING! Disconnect the lamp from power source, allow lamp to cool before attempting to change the bulb.
4.1.1. Bulb (fig.1.2). To gain access to the bulb, press the plastic tab (fig.1.3) inward and slide the lock (fig.1.4) upwards in order to release
the mesh cover.
4.1.2. Remove the old bulb by un-screwing anti-clockwise. Hold the new bulb in a clean cloth and screw in clockwise.
(Always use the correctly rated bulb).
4.1.3. GENERAL
Clean the lamp with a dry, dust-free cloth. DO NOT use solvents, or abrasives to clean the lamp.
ML60GP
Spare bulb Part No: ML60GP/B 60W CLEAR BULB.
ML6012GP
Spare bulb Part No: BS60 60W PEARL BULB.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
3
4
1
2
5
Fig.2.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
6
1
2
3
4
01284 757500
01284 703534
ML60GP, ML6012GP
www.sealey.co.uk
Web
sales@sealey.co.uk
email
Issue: 2 - 12/01/10
Advertisement
