Maintenance; Common Questions And Fixing - Bowket HL-A04 Operation Manual

Laser tattoo removal system
Table of Contents

Advertisement

even in the room preventing UVA/UVB and keep along 3 to 6 months
because of the treatment skin sensitivity to the sunlight. Using suntan
lotion or umbrella preventing can improve the effect early.
6)
different treatment parts and
7)
times. Normally one period of treatment is 1-2 times, every time at 20-30
days interval. If there is no special,every 2-4 weeks go to clinic check
again, if there is anything abnormally, please cure it early.
8)
pigmentation skin, normally it is 1-3 months. In order to get more favorable
effect, repeated treatment should be 1-3 months interval.

Maintenance:

1)
not the mineral water or tap water.
2)
the surface of machine injured.

Common Questions and Fixing:

1)
power plug doesn‟t reach it,please directly connect the power plug.
2)
blowing. Please replace the fuse with 5A/220V AC.
3)
Crash-stop switch being pressed. Please lift the Emergency-stop switch
up.
4)
the screen when the machine is on pre-ignition. One reason is that the
Xenon Lamp is damaged need to replace a new one. Another reason is
that the life time for Xenon is full, change a new one.
5)
impact during on shipment
process. May in the tube joint. Please call the service people to deal with it.
6)
curing treatment is not well enough, the reason maybe the temperature is
too higher or no water in the machine and damaged the body machine.
Please stop firstly, after half an hour starting the machine again.
ADD:RM902;ShangMei Times;NO.57;LongGuan RD;Long Hua Dist Shenzhen, China;518000
Tel:86-755-29994192
Email:sales@bowei-ch.com http://www.bowei-ch.com/
Period for laser treatment: According to the
pigment dark or not, the treatment may be several
Pigment fadeaway is a slow process, for the
Notice to use purified water or de-ionized water,
Be careful not to irradiate the machine avoiding
No signal after power on. The reason is that the
No signal after power on because of the fuse
No signal on the screen because that the
Touch-off light is off state pressing the button on
Water leaking out of machine, because of the
If you feel the energy is not big enough or the
Shenzhen Bowei tech Co.ltd.
13148703639

Advertisement

Table of Contents
loading

Related Products for Bowket HL-A04

Table of Contents