Adesso CONEY LARGE LED FERRIS WHEEL Assembly Instructions

CONEY LARGE LED FERRIS WHEEL LAMP
Assembly Instructions (English)
ASSEMBLY INSTRUCTIONS FOR
Model # 2120-22
1. Insert cord plug into the driver.
* We have included replacement LED's if needed.
If an LED goes out, please unscrew the lamp shade,
then use pliers to unscrew the two tiny screws
holding the LED in place. Remove the broken LED
and replace it with the new LED. Then secure the
new LED with the two tiny screws and screw the
lamp shade back on.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
BULB TYPE: (1) 20 x 0.5W Integrated LED
PARTS DIAGRAM:
1) LED Chip
2) Tornillo
Cord
21 Penn Plaza Suite 909 New York, NY 10001
Tel: (212) 736 4440 Fax: (212) 736 4806
2120-22 1.0
Driver
www.adessohome.com