After Each Ride - E Rider City 30 User Manual

After Each Ride:

1) Make sure the ignition key is turned off and that all keys are
removed and kept in a safe place.
2) Put the bike on it's centre kick stand
3) Do not charge or store the bike with 20' of any flame.
4) Put the battery on charge ready for its next usage. Charging should
always be carried out in fully dry conditions. Any water ingress into the
transformer will cause it to malfunction.
Plug the charger to a 13 amp power socket and you should see a
green light on the transformer. Attach the charger to the bike or
battery and this light should turn red. Wait until the light turns green
again and your battery is now fully charged.
If the charger light does not turn green when connected to the mains
power or does not change from green to red when connected to the
battery you should disconnect the charger from the mains supply and
contact us.
Under no circumstances should you attempt to open the transformer.