Advertisement
Quick Links
Check that...
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of the connection block.
Commissioning
•
Gently push the product into the wall, taking care not to trap any wiring.
•
Replace fuse or circuit breaker and switch on. Your light is now ready for use.
Fitting/replacing bulbs
•
The LED's in this product are non-replaceable.
Care and cleaning
Do not use solvents or abrasive cleaners as these could damage the finish.
Do not clean the units with a pressure washer.
The shade must be replaced immediately should the shade become cracked or damaged. This
fitting must not be used without the shade in place.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before cleaning and maintaining.
Instruction leaflet
Dakota LED Outdoor Brick
Light
6723F
26/05/2017
Advertisement
Summary of Contents for Dakota 6723F
- Page 1 Check that... Instruction leaflet • You have correctly identified the wires. • The connections are tight. Dakota LED Outdoor Brick • No loose strands have been left out of the connection block. Light Commissioning • Gently push the product into the wall, taking care not to trap any wiring.
- Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before installation of a new product. Before removing the existing fitting, carefully note the position of each set of wires.
Need help?
Do you have a question about the 6723F and is the answer not in the manual?
Questions and answers