Configuring A Time Event - Philips System4 LTC 2650/00 User Manual

LTC 2650 S 4 M
YSTEM ULTIPLEXER
Ending Time: By double-clicking the left mouse button in this text box, you can enter the ending time for which your time
event will stop. This also must be in five minute increments.
Function: By clicking the left mouse button in these text boxes, you will open a drop down box where you can select one of the
following options: None, Command String 1-16, and Restore String. To learn more on entering CCL Commands, see CCL
Commands String Table.
Log: This box is used to enable or disable the display of "Time Event XX in progress" text on the monitor.
S,M,T,W,T,F,S: This represents each day of the week starting with Sunday and ending on Saturday. Check the appropriate
boxes on the day(s) that you want the time events to occur.
Status: By clicking the left mouse button on the text box in this column, you can either Enable or Disable the Time Event
from occurring. As a short cut, the user can enable or disable all Time Events by selecting the entire column.
3.4.6

Configuring a Time Event

To configure a Time Event:
Open the Time Event configuration table by clicking once with the left mouse button on the Time Event tab in the System4
Configure Window. The Time Event configuration will be displayed.
Scroll to the appropriate side of the Sequence configuration table until the field described is in view. Enter an Interval, Ending
Date, Beginning Date, and Beginning Time as follows.
To select the Interval for which you want the sequence
to run, click with the left mouse button on the Interval
cell corresponding to the appropriate Event #. The cell
will become highlighted and a drop down menu arrow
will appear. Clicking on the drop down menu arrow will
display a list of available time intervals you can choose to
program the time event schedule. Select an option by
clicking on the desired period with the left mouse
button. Once an option is selected, the cell will return
to the highlighted state with the selected option
displayed.
Select a Beginning Date by clicking with the right
mouse button on the appropriate Beginning Date cell
for the Event # you wish to configure. A Change Date
dialog box will appear. Type in the desired Month,
Day, and Year numbers in the boxes provided. Press
the Tab key to change from one entry field to another
once the correct numbers have been entered. To
initiate the change, click on the OK button with the
left mouse key or press ENTER.
Select a Beginning Time by clicking with the right mouse button on the appropriate Beginning Time cell for the Event # you
wish to configure. A Change Time dialog box will appear. Select the desired time for Hours and Minutes by using the drop
down menu arrows provided. Hours are available in the 24 hour clock mode (i.e. Hour 13 = 1:00 PM), while Minutes are
available in five minute intervals. Select the correct time by clicking on the desired option with the left mouse button. To
initiate the change, click on OK with the left mouse button or press ENTER.
GUI
Interval Selection Menu
Change Date Menu
47
C
ONFIGURATION