Download Print this page

Living & Co LF128 Instructions Manual

Cast iron chiminea

Advertisement

Quick Links

CAST IRON CHIMINEA
Model No. LF128
Retain these instructions for future use.
Important: The installer or seller must leave these instructions with the consumer.

Advertisement

loading

Summary of Contents for Living & Co LF128

  • Page 1 CAST IRON CHIMINEA Model No. LF128 Retain these instructions for future use. Important: The installer or seller must leave these instructions with the consumer.
  • Page 2 WARNING Failure to read and follow this manual and the safety warnings herein may result in serious bodily injury or death, or in a fire or an explosion causing damage to property. Important Check with your local council regarding fire bans before using your firepit. Check with your local council regarding air quality regulations.
  • Page 3: Safety Warnings

    SAFETY WARNINGS WARNING! Risk of burns! Ensure the chiminea is located on an even and fireproof surface containing neither glass nor plastic.  CAUTION! Never use spirits or petrol to ignite or re-ignite the fire! CAUTION! Use specifically formulated BBQ lighting fluid, paste or fire lighters. ...
  • Page 4 chiminea chiminea 26. All surfaces of this are hot when in operation. To avoid burns, do NOT touch until it has completely cooled unless you are wearing protective gear (Potholders, gloves, mittens, hot pads & etc.). Never touch ashes or coals to see if they are hot. chiminea 27.
  • Page 5: Parts List

    PARTS LIST Tools Required for Assembly (Not Included) Phillips Head Screwdriver Adjustable spanner...
  • Page 6: Attaching The Legs

    ASSEMBLY CAUTION! Whilst every effort has been made in the manufacture of your Chimnea to remove any sharp edges, you should handle all components with care to avoid accidental injury. Tools required: Either a crosshead (Phillips) or flat-bladed screwdriver and either an adjustable spanner or a pair of pliers.
  • Page 7 STEP 3 - FLUE ASSEMBLY Washer(P),Lock Washer(Q) Install Main Flue(D) to Top Bowl(F1) using Bolt(R2) and Nut(O) Install Top Fule(C) to Main Flue(D),using Bolt(R1), Washer(P),Lock Washer(Q) and Nut(D) Tighten all the bolts & nuts firmly. Place Flue Grate (B) and Rain Lid(A) on the Top Flue(C) INSTRUCTION 1.
  • Page 8: Cleaning And Care

    CLEANING AND CARE WARNING! Risk of burns! Allow the chiminea to cool down completely before cleaning it. Never use water to extinguish the hot chiminea. This may cause burns or scalding. The great thing about cast iron chimineas is that you will not have much maintenance.Occasional cleaning is necessary to preserve its clean appearance.