Structure and Function ...............5 Assembly and Start-up .................7 Operational Use ...................9 Troubleshooting Guide ................10 Maintenance ..................10 Occupational Health and Safety ............11 Transport and Storage .................11 Terms of warranty ................11 Sample of the Declaration of Conformity ..........12 welding station ERGO-STW-R 11.10.2016...
The construction of the ERGO-STW-R welding station meets the requirements of the current state of technology as well as the safety and health assurances included in: ...
2. Application ERGO-STW-R welding station has been developed for extraction the dust laden air from the workplace – from above the welding table – and cleaning it from dry dusts (without aggressive impurities or without compounds creating explosive conditions) and capturing fumes arising during grinding, welding etc.
● shut-off damper, ● motor protective switch, ● worktable with a rotary table, ● tool locker, ● suction chamber with a grate and a waste drawer. Fig. No.1 – Structure of the welding station type ERGO-STW-R 11.10.2016 welding station ERGO-STW-R...
Page 6
Fig. No.2 – Dimensions of the welding station type ERGO-STW-R The main supporting structure is a workshop table equipped with a rotary table for welding the small elements and a suction chamber with a grate. Under the table is placed an extraction fan which (according to the damper position) is extracting the impurities UPWARDS through the ex- traction arm or DOWNWARDS through the grate in the tabletop.
1. Turn off the device with the red pushbutton. 2. Leave the extraction arm in the ultimately used position (operational state), or if this cau- ses barrier to the personnel / people in vicinity – set the extraction arm into home position. 11.10.2016 welding station ERGO-STW-R...
Page 8
Fig. No.3 – Connection Diagram of the fan to the power supply welding station ERGO-STW-R 11.10.2016...
(which is important to keep the stable arm position), whereas, on the other hand this cannot cause any excessive resistance while User is changing the arm position. 11.10.2016 welding station ERGO-STW-R...
During the maintenance activity check the mechanical and electrical connections. Any activity associated with repair / technical revision has to be carried out exclusively after the device is disconnected from the power supply system. welding station ERGO-STW-R 11.10.2016...
Infringement of the Section 3 “Reservations of Producer” of the Use and Maintenance Manual and especially modifications undertaken by User on one’s own shall cause the loss of warranty validity. 11.10.2016 welding station ERGO-STW-R...
National Register of Court Bank Account: Bank Zachodni WBK S.A. phone: +49 58 829 64 80 KRS 0000308902 company stock 56 1500 1025 1210 2007 8845 0000 email: klimawent@klimawent.com.pl 13.779.200 zł paid in total www.klimawent.com.pl welding station ERGO-STW-R 11.10.2016...
Page 13
NOTES: 11.10.2016 welding station ERGO-STW-R...
Page 14
NOTES: welding station ERGO-STW-R 11.10.2016...
Page 15
NOTES: 11.10.2016 welding station ERGO-STW-R...