Subscribe to Our Youtube Channel
Summary of Contents for GT 7100 Low Flyer–I
- Page 1 Globetrotter Motion cc (1989/016938/23) Durbanville, 7550, South Africa Email: info@globetrotter-motion.com Website: www.globetrotter-motion.com User Manual 7100 Low Flyer–I GTM- 7100-MAN-001 (2) Copyright Globetrotter- Motion cc 2021...
- Page 2 User Manual 7100 Low Flyer -I Table of Contents Introduction Specification Safety Instructions Hand Rim Installation Adapting to the New Hand Rim General Service and Care Warranty GTM- 7100-MAN-001 (2) Page 2 of 11...
- Page 3 User Manual 7100 Low Flyer -I Introduction The Globetrotter Motion, 7100 Low Flyer-I Hand Rim, is intended for daily use wheelchairs, both indoors and outdoors. It is the result of an intensive development program to address the ergonomic short comings of the traditional hand rim to: •...
-
Page 4: Specification
User Manual 7100 Low Flyer -I Specification Outer Diameter: 525 mm Interface Diameter: 512 mm Mass per hand rim: 385 g ± 5 g Material: Carbon Fibre / Epoxy composite Attachments: 6 x M5 mm bolts Maximum mass of User: 120 kg GTM- 7100-MAN-001 (2) Page 4 of 11... -
Page 5: Safety Instructions
User Manual 7100 Low Flyer -I Safety Instructions WARNING Special care required to direct sunlight. Check and allow installation and adjustment of to cool down before using. your 7100-Low Flyer I Hand Rim. exceed 170°F (77°C) Take careful note of the points exposure to your hand rims. - Page 6 User Manual 7100 Low Flyer -I Hand Rim Installation Included in the installation kit: Two handrims 6 off M5 pan hex head stainless-steel bolts. 6 off M5 self-locking stainless-steel nuts 6 off shimming washers as required Tools required (not included): 5 mm Alan key 5-20 Nm torque wrench Feeler gauge...
- Page 7 Figure 3. Only tighten (C) until the nuts just touch the tab. DO NOT tighten further until the following checks have been performed. > 0.3 mm Figure 2: Measuring the gap between the mounting tab and wheel Using a feeler gauge, check that the gaps between the mounting tabs and wheel does not exceed 0.3 mm.
- Page 8 User Manual 7100 Low Flyer -I Adapting to the 7100 Hand Rim The 7100 hand rim may require you to adapt your hand grip and pushing style to ensure that you gain the greatest benefit and safety from the product. The following points will assist with the process. 1.
- Page 9 Visually check if there are If required, lightly polish sharp edges or loose fiber only the sharp edge with ends 3000 grit water paper. b. Gouges >0.5 mm Visual Return the hand rim to your authorized dealer for inspection. c. Cracks, de-laminations and...
-
Page 10: Maintenance
User Manual 7100 Low Flyer -I EMERGENCY REPAIR If the hand rim has been cracked or punctured and the User is stranded, but the hand rim can still safely propel the wheelchair, a temporary repair may be performed by covering the damaged area with Duct Tape, such as Heavy Duty Duct Tape 3939. -
Page 11: Filing A Warranty Claim
User Manual 7100 Low Flyer -I Warranty WARRANTY Globe Trotter Motion warrants, to the original owner, that this new Hand rim shall be free of defective materials and workmanship for a period of one year from the date of the original purchase (proof of purchase required) provided the Hand rim is operated under normal conditions and use.
Need help?
Do you have a question about the 7100 Low Flyer–I and is the answer not in the manual?
Questions and answers