Storage - Panasonic EH‑HE94 Operating Instructions Manual

Scalp massager
Table of Contents

Advertisement

• Dry the appliance socket thoroughly.
• Place the brush attachment with the brush parts facing upwards.
• Do not dry the massager in direct sunlight.

Storage

Notes
When installing the brush
attachment onto the main body of
the massager, if the holding part
falls off, align the prongs of the
holding part with the holes and
press the holding part with your
finger until a "click" is heard.
1
1
Install the main body of the
massager and the brush attachment.
• See page 12 for the details of
installing.
• Install the main body of the
massager and the brush
attachment after they are
completely air‑dried.
2
2
Place the massager on the holder.
• Align the four brush holding parts with the
recessing part of the holder.
• Put at a ventilated place.
• Confirm that the power is off.
• Put the holder at a flat place.
• Do not leave the massager where it will be exposed to direct
sunlight.
• Never place the massager in a hot, humid environment such as
the bathroom and sauna room.
• Never place the brush facing downward at other sites so as to
avoid deformation of the brush.
20
Holding part
Prong
Hole
"click"

Advertisement

Chapters

Table of Contents
loading

Table of Contents