MT Evolution Quick Start Manual

MT Evolution Quick Start Manual

Cordless rotary tattoo machine

Advertisement

Quick Links

Cordless Rotary Tattoo Machine Evolution
Congratulations on your purchase of MT Mustang Tattoo equipment!
The experience of our engineers and continuous testing by masters during the development phase allows to
achieve the perfect balance of accuracy, ergonomics and high quality.
Here is Evolution, the first Russian battery-powered tattoo machine of the new generation.
Feautures:
• This machine has only one pair of friction. It is made of graphite and antifriction polymer. There are
no springs. Thanks to this design, the machine has the lowest possible friction and heating losses,
spending maximum battery energy to perform useful work.
• Comes with a magnetic stand with a pause function that does not require power.
• Uses several types of batteries: the most common universal type 18650, and type 18350, designed to
minimize the total weight.
• Has modes of indication of charge, voltage and current amperage.
• Possesses non-volatile memory of indication mode and settings in memory cells.
• Fine tuning of voltage in 0.1 volt steps.
• Function of smooth change of engine speed when switching on / off and changing the memory cell.
• Connector for auxiliary charging, which is active both in the off mode and during operation.
• All body parts are made from high strength aircraft alloy B-95.
• Works with disposable Cheyenne D-GRIPS holders.
Holder position lock.
• Extended range of an optimum operating voltage.
• Universal purpose (Contour, shading, shadows).

Contents of delivery:

Evolution machine. Magnetic stand with pause function. Battery charging station for 2 slots. USB to
Micro USB cable for charging station. Battery type 18650. Battery type 18350. Battery isolation
holder. Original MT Wire USB Type-A to USB Type-C for charging the machine directly. Spare
position locker. Spare O-ring. Warranty card.
Read this manual carefully before using!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Evolution and is the answer not in the manual?

Questions and answers

Summary of Contents for MT Evolution

  • Page 1 • Contents of delivery: Evolution machine. Magnetic stand with pause function. Battery charging station for 2 slots. USB to Micro USB cable for charging station. Battery type 18650. Battery type 18350. Battery isolation holder. Original MT Wire USB Type-A to USB Type-C for charging the machine directly. Spare...
  • Page 2 User interface elements 1 Holder 2 Position locker 3 O-ring 4 Display 5 Back cover 6 Charge plug Performance characteristics • Working voltage: 4-11 V • Motor power: • Maximum needle stroke: 3.8 mm • Weight with battery 18650: 198 g •...
  • Page 3 *The negative contact is a flat, completely flat edge of the battery without a protective film. Press the “MT” button to turn it on and for a few seconds listen to how it works. The sound should be smooth, without extraneous clicks and drops.
  • Page 4 When charging is complete, they will turn green. Charging directly from the machine in the off state: Connect the MT USB Type-A to USB Type-C wire to the machine with the USB Type-C connector. Connect the USB Type-A connector to a power outlet. There are no restrictions on the power of the supply network, but charging the battery directly with the machine will be carried out with a current of 0.5A,...
  • Page 5 If you still want to find the ideal balance between weight and operating time for you personally, then you can ask our company to produce a tab for a battery of any length. Care Disinfect the holder with disposable gloves. Before changing a cartridge, turn off the machine. ➢...

Table of Contents