Kimball 84-035 Operating Instructions Manual

1/2” impact gun

Download this manual

Operating Instructions Manual

Read through this owner's manual carefully before using the product. Protect yourself and others by observing all safety

information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to

product or property. Please retain instructions for future reference.

Specifications:

84-035

9,500

*(Note: Dynamic Pressure, which is the pressure while the tool is in operation.)

84-035

1/2" IMPACT GUN

850

1000

1/4

90*

5.07

Need help?

Do you have a question about the 84-035 and is the answer not in the manual?

Page 1 Read through this owner’s manual carefully before using the product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference. 84-035 1/2” IMPACT GUN Specifications:...
Page 2 This manual contains information that is very important Designed to operate on 90 PSI, lower pressure (below 90 to know and understand. This information is provided PSI) will reduce performance of the tool while higher air for SAFETY and to PREVENT EQUIPMENT pressure (over 90 PSI) raises the performance of the tool PROBLEMS.
Page 3 Midwest product proves defective in material or workmanship components. The Rotor Blades can be easily removed within one year after purchase, return it to the Kimball Midwest and replaced by hand. Use a high-quality air tool Authorized Service Center, transportation prepaid, enclosing...
Page 4 84035 1/2" DR. AIR IMPACT GUN Parts Description Q'ty Housing Assembly ( incl. 8.9 ) Air Inlet O-Ring Exhaust Deflector O-Ring Spring Throttle Valve Assembly Throttle Valve Seat O-Ring Gasket O-Ring Reverse Valve Spring Pin O-Ring Backhead Retainer Ball Bearing Rear End Plate Rotor Rotor Blade...