Advertisement
Ensure the back bar is level and fasten the clamps tightly to the wall.
Review the completed EasyAwn™ assembly as shown below.
Item
Description
1
Back Bar
2
Cover
3
Valance
4
Front Bar
Slide the rope sewn into the back edge of the cover into the back bar on the wall. You may need to use
a screwdriver to slightly open the channel at each section if the fabric catches on the edges.
Copyright 2015, EasyAwn, LLC
2
5
Assemble the front bar and slide it into the front pocket of the cover.
NOTE: On the 8', 10' and 12' Wide EasyAwn Classic Awnings
there is a center return arm as shown. Make sure the
threaded rafter holder is above and the tab with he hole in it is
Page 4
6
Item
Description
5
Pocket
6
Return Arm
7
Rafter
8
Center Return Arm (not shown)
below the front bar
EA-INST-C060403
Advertisement
