Download Print this page

EasyAwn Standard Awning Installation, Care And Maintenance Manual

Advertisement

Quick Links

EasyAwn™ Installation, Care and Maintenance Manual
EasyAwn
"Quality, Since 1946"
READ AND SAVE THESE INSTRUCTIONS!
EasyAwn™ Standard Awning Installation
Congratulations – You have made an excellent decision in choosing an EasyAwn Do-it-
Yourself awning. EasyAwn uses innovative designs and quality materials to make your awning
easy to install and ensure a long life.
Please take a minute and become familiar with this entire document BEFORE beginning your
installation. This will ensure a quick, trouble-free installation
Basic Tools Needed for Installation
Tape Measure & Pencil
Drill
Drill Bits (Depends on Surface)
Adjustable Wrench
General Comments
• Wash your hands before installation and be sure they are clean when handling the
fabric.
• Always be careful with the fabric during installation. Drills, screwdrivers and other items
can puncture the fabric. This and other customer installation damage is not covered by
the warranty.
• A second person to assist in holding the awning up and the fabric back when installing
your awning is recommended
• Take your time when planning to install your new awning. Although simple to install,
take your time to ensure a proper installation.
IMPORTANT
!
Copyright 2015, EasyAwn, LLC
EasyAwn, LLC
Toll Free: 877-EasyAwn
http://www.EasyAwn.com
Level (recommended)
Screwdriver
Ladder
If you need replacement parts or hardware for
installation, please do not return your awning
to the store or dealer. We will promptly
provide these to you at no charge.
Call 877-EasyAwn or 877-327-9296
Page 1
EA-INST-C060403

Advertisement

loading

Summary of Contents for EasyAwn Standard Awning

  • Page 1 READ AND SAVE THESE INSTRUCTIONS! EasyAwn™ Standard Awning Installation Congratulations – You have made an excellent decision in choosing an EasyAwn Do-it- Yourself awning. EasyAwn uses innovative designs and quality materials to make your awning easy to install and ensure a long life.
  • Page 2 Planning and Layout of the Installation Location The first step in installing your EasyAwn™ is to determine where you will mount the awning. It should be installed level and centered over the window or door. If the door or window opens outward, the awning must be high enough to provide clearance when the door or window is in the open position.
  • Page 3: Item Description

    (item 9 is shown below) Assembly and Mounting of your new EasyAwn Awning There are 2 options for installing your new Easyawn Awning. Installation Option 1 Assemble the awning on the ground and then attach the awning to the home.
  • Page 4 Assemble the front bar and slide it into the front pocket of the cover. NOTE: On the 8’, 10’ and 12’ Wide EasyAwn Classic Awnings there is a center return arm as shown. Make sure the...
  • Page 5 The last step is to tighten the frame bolts. Install Center Brace – 8’ -12’ EasyAwn Only: Slide the open end of the center brace over the stub on the center section of the front bar. Insert the pin on the opposite end into the hole in the center section of the back bar.
  • Page 6 EasyAwn, LLC warrants this product against defects in materials and workmanship on a prorated basis for a period of seven years from the date of original purchase. EasyAwn, LLC agrees to either repair the product or replace it, at the sole discretion of EasyAwn, LLC.
  • Page 7 EasyAwn, LLC’s warranty covers product failure due to defects in material or workmanship only. It does not cover corrosion or discoloration, or product failure due to misuses, abuse, faulty installation, alteration, lack of reasonable care, or any other failure not related to defects in materials or workmanship.

This manual is also suitable for:

Classic