Rebar Tools Diamond DBC-16H Manual

Portable electric #5 (16mm) combination rebar bender and rebar cutter

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Portable Electric #5 (16mm) Combination

Please note: This tool is rated for #5 (16mm) Grade 60 Rebar Only

This tool is rated for #5 (16mm) Grade 60 Rebar

This tool is rated for #5 (16mm) Grade 60 Rebar Only

or cut material larger in size or rebar harder than grade 60 or you will cause tool

or cut material larger in size or rebar harder than grade 60 or you will cause tool dam

age or machine failure.

DBC-16H

Rebar Bender and Rebar Cutter

Only. Do not try to bend

. Do not try to bend

dam-

(DECEMBER 2007)

Table of Contents

Need help?

Do you have a question about the Diamond DBC-16H and is the answer not in the manual?

Questions and answers

Summary of Contents for Rebar Tools Diamond DBC-16H

Page 1 DBC-16H Portable Electric #5 (16mm) Combination Portable Electric #5 (16mm) Combination Rebar Bender and Rebar Cutter Rebar Bender and Rebar Cutter Please note: This tool is rated for #5 (16mm) Grade 60 Rebar Only This tool is rated for #5 (16mm) Grade 60 Rebar Only This tool is rated for #5 (16mm) Grade 60 Rebar Only This tool is rated for #5 (16mm) Grade 60 Rebar Only.
Page 2: Table Of Contents
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO USE YOUR TOOL! GENERAL SAFETY RULES INSPECTION WORK AREA SAFETY BLEEDING INSTRUCTIONS ELECTRICAL SAFETY GENERAL OPERATING INSTRUCTIONS PERSONAL SAFETY PRE-USE CHECKS POWER TOOL USE AND CARE WARM-UP SERVICE STOPPER BOLT ADJUSTMENT BASIC BENDING INSTRUCTIONS CUTTING CUTTING REBAR BENDING...
Page 3: General Safety Rules
GENERAL SAFETY RULES your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. • If devices are provided for the connection of dust extraction WARNING: Read all instructions. Failure to follow all instruc- and collection facilities, ensure these are connected and properly tions listed below may result in electric shock, fire and/or serious used.
Page 4: Basic Bending Instructions
BASIC BENDING INSTRUCTIONS BASIC CUTTING INSTRUCTIONS Important: Always read, understand and obey the safety in- Important: Always read, understand and obey the safety in- structions included with your new DBC-16H #5 Combination structions included with your new DBC-16H #5 Combination Rebar Cutter and Bender before operating this tool or any Rebar Cutter and Bender before operating this tool or any other power tool.
Page 5: Bending/ Cutting
GENERAL SAFETY Notes: Be cautious on projects that strictly require meeting CRSI bending specifications. Use rebar cutters on maximum Grade 60 steel reinforcing bars only. These tools are not to be used in cutting other Benner-Nawman offers other rebar benders that can meet kinds of metal or materials.
Page 6: Inspection
INSPECTION GENERAL OPERATING INSTRUCTIONS CAUTION: Indicates hazard that could result in Inspect cutter before each application. Faulty or loose cutter minor personal injury and/or product damage. blocks could result is personal injury. Keep handle dry, clean and free from oil and/or grease. Keep housing and piston free of dirt and iron filings.
Page 7: Stopper Bolt Adjustment
STOPPER BOLT ADJUSTMENT 4. If a drop in power is observed and motor is unusually hot, check carbon-brushes. (See maintenance) THE STOPPER BOLT IS PROBABLY 5. If piston should ever fail to retract completely, push rear THE MOST IMPORTANT PART cutter block backwards to manually retract piston or check OF YOUR PORTABLE CUTTER...
Page 8: Oil-Change
CAUTION: Hydraulic oil may cause inflammation 3. Finally, follow procedure for oil-level check. (Steps 2-8). of the eyes and skin. If ingested, it will cause diar- NOTE: Dispose of hydraulic oil in accordance with rhea and vomiting. In case of eye contact, rinse in local regulations.
Page 9: Tool Specifications
TOOL SPECIFICATIONS DBC-16H DBC-16H Model No. Cutting Mode Bending Mode Cut / Bend 180 degree bend in 180 degree bend in 3 seconds 3 seconds Speed 7 seconds 2.42” (62 mm) Center Roller Not Applicable Diameter (R 31) 1-3/4” (44.5 Clearance 4.5”...
Page 10: Parts Drawing
PARTS DRAWING...
Page 12: Manufacturer Representatives
MANUFACTURER REPRESENTATIVES W.G. WRIGHT BORDERLAND ENTERPRISES Territory: AK, WA, OR, Territory: Mexico, Belize, MT & ID Guatemala, El Salvador, Hon- 503-232-3480 duras, Nicaragua, Costa Rica, Fax: 503-232-0401 Panama, Ecuador & Peru. LEW HUDSON SALES www.wgwright.com 623-935-3090 (USA) Territory: AR, LA, OK, TX, WY, Fax: 623-935-9577 (USA) UT, CO, AZ, NM, FL, GA, Al, SC, LARRABEE COMPANY...