Page 1
Solid Pine 3-Tier Shoe Rack Assembly Instructions 875/3878 - please keep for future reference Dimensions Width - 83.8cm Depth - 26.6cm Height - 50.7cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800...
Page 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the • Do not stand or put weight on • We do not components and tools listed on the product, this could cause recommend the page 1.
Page 3
Components - Panels Please check you have all the panels listed below Upright x 4 Cross piece x 6 Shelf slat x 9 (50.7(h)cm) (24.6(d)cm) (79(w)cm) Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0845 640 0800 Note: may be supplied than are required.
Page 4
Assembly Instructions Step 1 Connect 3 x Shelf slat 2-3 mm to 2 x Cross piece as shown using 6 x 30mm screw 2 Pcs Ensure that the Shelf slats are the same way round and are fitted snugly into the groove of the Cross piece.
Page 5
Assembly Instructions Step 2 12 Pcs Place the 3 shelves on the floor or a flat surface as shown and connect 2 x uprights 2 Pcs using 12 x 30mm screw to complete the front/back side of the shelf. Ensure that the Cross pieces are fitted snugly into the groove of the uprights and that the...
Page 6
Solid Pine 3-Tier Shoe Rack Assembly Instructions 875/3878 - please keep for future reference Dimensions Width - 83.8cm Depth - 26.6cm Height - 50.7cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800...
Need help?
Do you have a question about the Solid Pine and is the answer not in the manual?
Questions and answers