Use - AEG DI7490-M User Manual

USE

�
BUTTON DISPLAY
A
Displays the set speed
B Displays the set speed
C
Displays the set speed
D Displays HI The spot flashes
E
Displays the time remaining before
the hood turns off (countdown)
and the Set speed. The spot at the
bottom right flashes
F
Displays F
Displays C
� �
FUNCTIONS
Turns the suction motor on and off
Decreases the speed of the motor V3 V2 V1
Increases the speed of the motor V1 V2 V3
Starts maximum suction speed. After 5 minutes the speed will return
automatically to the one set before. This function can be deactivated
by pressing the button again (the decimal point at the centre of the
display will flash).
Enables automatic delayed shutdown of the appliance (Delay), with a
delay that depends on the working speed set.
Speed 1 delay 20 minutes
Speed 2 delay 15 minutes
Speed 3 delay 10 minutes
The proposed delay time can be changed by pressing the button succes-
sively and selecting one of the options available (5, 10, 15, 20, 25 and
30 minutes). At the end of the time selected the appliance will turn off
automatically. To deactivate this function, simply press the button until
the option selected is 0 or turn the motor off.
Turns the hob lighting system on and off
Indicates the need to wash the metal grease filters. The alarm is triggered
after the Hood has been in operation for 100 working hours. This indication
is only visible when the motor is turned off. To reset the alarm:
Turn the motor off and press button D for approximately 3 seconds,
until the display turns off.
Indicates the need to change the activated charcoal filters, and also to
wash the metal grease filters. The alarm is triggered after the Hood has
been in operation for 200 working hours. This indication is only visible
when the motor is turned off. This indication must be activated following
the procedure described in the section on maintenance of the activated
charcoal filter. To reset the alarm:
Turn the motor off and press button D for approximately 3 seconds,
until the display turns off.
� �
USE
24
�