Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sierra Comfort SC-3000
Summary of Contents for Sierra Comfort SC-3000
- Page 1 Electric Lift Massage Table User Manual For Use with Model Numbers: Standard Electric Lift Massage Table – Flat, SC-3000 Standard 2-Section Electric Lift Massage Table – Adjustable Back, SC-3001 Standard 4-Section Electric Lift Massage Table – Adjustable 4 Section, SC-3002...
- Page 3 Never should more than one Sierra Comfort does not reserve the right to control the person be allowed on the table at once. Do not front use of its products, and is not liable for improper or load one end of the table.
-
Page 4: Warranty
Any parts/components will be replaced and shipped free of charge so as long as the warranty is valid. Sierra Comfort reserves the right to improve the design of any product without any obligation to improve a product previously manufactured. -
Page 5: Safety And Warning Symbols
14. Do not apply more than 25 lbs. (11 kg) of total working weight to the face cradle. 15. Do not use any attachments, accessories, or components that were not manufactured/supplied by Sierra Comfort. 16. Never use or store your table in wet or overly humid conditions. Water/excessive moisture may damage materials and components. -
Page 6: Model Type
MODEL TYPE STANDARD ELECTRIC LIFT MASSAGE TABLE (SC-3000) Tabletop: Length 73” / Width 30” / Depth 3” Table Height (Adjustable): 15.5” to 32.5” Table Weight: 110 lbs. Working Weight Capacity: 500 lbs. Elongated Adjustable Face Cradle (SC-529) Elongated Face Pillow (SC-533) STANDARD 2-SECTION ELECTRIC LIFT MASSAGE TABLE (SC-3001) Tabletop: Length 73”... - Page 7 INSTALL ELECTRICAL COMPONENTS Before installing the components, get assistance in helping to turn the table to its side or upside down (being sure to protect the tabletop). This will allow for convenient access to the underside of the table and proper installation of all components. 1.
-
Page 8: Features & Adjustments
FEATURES & ADJUSTMENTS Determine a safe and spacious area to permanently position your massage table. Be sure that the surface area is level in order to provide maximum stability. With proper assistance, turn the table over so that it is standing evenly on all four wheel casters. 1. - Page 9 HEADREST & FACE PILLOW STEP 1: Place headrest face down and fully release the locking lever so that the tubular arms are able to pivot freely. STEP 2: Unfold the tubular arms and insert through the grommet rings at the end of the table.
-
Page 10: Troubleshooting
TROUBLESHOOTING HYDRAULIC MOTOR IS NOT RESPONDING 1) Be certain your power source is live and rated for 110V; 2) Make sure the power cord and all related components are secured at their insertion points; 3) Confirm that the bulb located on the control box illuminates when the power cord is plugged into the wall outlet.
Need help?
Do you have a question about the SC-3000 and is the answer not in the manual?
Questions and answers