Do you have a question about the Steam Dynamo and is the answer not in the manual?
Questions and answers
Tiffiney
February 5, 2025
My steamer isn’t heating up.
1 comments:
Mr. Anderson
February 10, 2025
The Ewbank Steam Dynamo steamer may not be heating up due to the following reasons: - The power supply is not connected properly. - The water level is too low or empty. - There is a blockage in the hose, tools, or nozzle. - The unit may need descaling, especially in hard water areas.
Check the power connection, ensure there is enough water, inspect for blockages, and descale if necessary using a kettle descaler solution.
Page 1
Steam Dynamo 12-09 us:Layout 1 22/12/09 14:07 Page 1 Steam Dynamo Model SC1000 Care and Use Instructions For service and further information, please contact: Earlex Inc. 8261 Highway 73, Suite F, Stanley, NC 28164 Tel: 888-783-2612 www.ewbankusa.com...
Page 2
Steam Dynamo 12-09 us:Layout 1 22/12/09 14:07 Page 2 Steam Dynamo Thank you for purchasing your Steam Dynamo, we hope you enjoy using it. Please read the manual carefully to get the most out of your product. Pack contents: • Steam Dynamo •...
Page 3
Steam Dynamo 12-09 us:Layout 1 22/12/09 14:07 Page 3 Steam Dynamo Safety Instructions - CAUTION • Do not immerse cord, plug or machine in • Do not direct steam at people, animals or water or any other liquid. at electrical devices.
Page 4
Steam Dynamo 12-09 us:Layout 1 22/12/09 14:08 Page 4 Steam Dynamo How to put your Steam Dynamo together Handle Extension wands x 2 Floor tool Swivel-adaptor Adaptor Floor brush/mop tool Towel grips Angle, and Plastic brushes Window/tile cleaner...
Page 5
Steam Dynamo 12-09 us:Layout 1 22/12/09 14:08 Page 5 Steam Dynamo Cleaning Floors Instructions for Use • Make sure the machine is unplugged from the electrical outlet. • Unscrew the safety cap (1) by turning counterclockwise. Please note the cap cannot be un screwed when the unit is pressurized.
Page 6
Steam Dynamo 12-09 us:Layout 1 22/12/09 14:08 Page 6 Steam Dynamo How to use the handle A. Press the button in to attach the straight adapter or the extension tubes. B. Squeeze the trigger on the handle for steam. C. Lock the trigger for constant steam.
Page 7
Steam Dynamo 12-09 us:Layout 1 22/12/09 14:08 Page 7 Steam Dynamo • Attach the floor brush to the extension wands, which snap together. Then attach the extension wand to the steam gun. Do ensure the extension wands are firmly connected.
Steam Dynamo 12-09 us:Layout 1 22/12/09 14:08 Page 8 Steam Dynamo Technical data • 8.2 ft power cord • Water capacity - 50 Fluid ounces (1500ml) • Steam-up time – up to 12 minutes depending on volume of water • Working time – 45 minutes •...
Need help?
Do you have a question about the Steam Dynamo and is the answer not in the manual?
Questions and answers
My steamer isn’t heating up.
The Ewbank Steam Dynamo steamer may not be heating up due to the following reasons:
- The power supply is not connected properly.
- The water level is too low or empty.
- There is a blockage in the hose, tools, or nozzle.
- The unit may need descaling, especially in hard water areas.
Check the power connection, ensure there is enough water, inspect for blockages, and descale if necessary using a kettle descaler solution.
This answer is automatically generated