Table of Contents
Advertisement
Thermal Cut-Out
A Thermal Cut-Out is built into this heater to
minimise the risk of overheating and maximise
safety to users. A heat sensing device monitors
internal temperatures in the appliance. If heat
levels rise beyond a preset safety threshold
the Cut-Out will switch off power to the heat
elements, eliminating further danger. Let the
heater cool for approximately 10 minutes, then it
will function normally again.
In the event of a Thermal Cut-Out check for
visible obstructions to air inlets. Try moving
the appliance to a new position. Sometimes
placement close to walls and furniture can
restrict air movement enough to cause the
heater to shut down.
Safety Tip-Over Switch
This appliance is fitted with a safety tip-over
switch which automatically turns the unit off
when it is tilted or tipped over. Always ensure that
the unit is placed on flat solid ground before
operating.
Technical
Specifications
Power Supply: AC 220-240V~ 50Hz
Power Consumption: 2100-2400W
Dust proof & Waterproof protection rating class:
IP21
NOTE: As a result of continual
improvements, the design and
specifications of the product within may
differ slightly to the unit illustrated on the
packaging.
Care and Cleaning
• Before cleaning, ensure that the heater is
switched in the off position and is unplugged
from the socket.
• Clean the exterior surfaces of the heater with
a dry, soft cloth.
• Never use any form of detergents or solvents
to clean the heater.
• Never spray with liquids or submerge in liquids
or water.
• DO NOT attempt to clean the interior of the
heater.
• DO NOT ATTEMPT TO OPEN THE CASE OF THIS
HEATER at any time. There are no consumer
serviceable parts inside this unit.
• When the heater is stored during the off
season, neatly wind the power cord around
the base of the heater to prevent any
damage to the power cord.
Note: If the power cord of the appliance
becomes damaged discontinue use.
7
Advertisement
Table of Contents
