Advertisement
7. In order to make operating time longer, the fan will still work for
cooling the plate, it is better to plug out after the fan stops working.
8. If the appliance is not be used for a long period of time, pull out the
power plug.
9. Some models have structural design against cockroaches, if needed,
you can put something like mothball to expel the cockroaches.
5. TROUBLESHOOTING AND TREATMENT
During operations, if any errors occurred, please check the following
table before calling for service. Below are common errors and solutions.
PROBLEM
CHECK POINTS
Power outage?
After connecting
the power and
pressing the
Is the plug connected
"Power" key, the
firmly?
appliance has no
response
Is the fuse broken down?
Induction Cooker
Incompatible cookware or
send out "Beep"
no cookware is used?
Sound
Is the cookware not
considerable placed from
the center of the heating zone?
Is the cookware bigger
than 12cm?
Is the cookware empty or the
No operation during
temperature too high?
the heating being
Is the air intake/exhaust vent
in use
clogged or dirt has
accumulated
Is the cooker working over
2 hours without any external
instruction?
8
www.NutriChefKitchen.com
SOLUTION
Use when electricity
resumes
Check the root causes
carefully. If the problem
can't be fixed,please
contact service center for
checking and repairing.
Replace compatible
cookware for the
induction cooker
Replace the cookware at
If the above solutions can't fix the problem, unplug the appliance
the center of the defined
heating zone
immediately, contact service center for inspection and repairing, note
Change the diameter
the error code and report it to service center ltd. To avoid any danger and
of cookware bigger
than 12
damage to the appliance, do not disassemble or repair it by yourself.
Please check whether
the appliance is being
misused
Remove the stuff clogging
the air intake/exhaust vent.
Operate the appliance
again after cooling down.
Reset cooking modes
or use timer function
PHENOMENON
CHECK POINTS
No Cookware or
Error Codes Occur E0
Incompatible cookware used
Low-Voltage
Error Codes Occur E1
High-Voltage
Error Codes Occur E2
Top Plate Overheat
Error Codes Occur E3
Error Codes Occur E4
Top Plate Sensor Open Circuit
Error Codes Occur E5
IGBT Overheat
Error Codes Occur E6
Top Plate Sensor Short Circuit
Internal Circuit Error
Error Codes Occur E7
SOLUTION
If error signal E0, E3,
E5 shows, please
check whether the
cookware is not
suitable or switch on
the appliance again
after it cooled down
naturally.
If error signal E1, E2,
E4, E6, E7, occurs
please contact service
center for checking
and repairing
9
www.NutriChefKitchen.com
Advertisement
