Advertisement
SurPro Wire Tying Machine (WIT110) User Manual
Step 1
Set up wire and clip as illustrated below. Ensure wire is fully inserted.
Position wire
A
against the slot.
LOCATE A DEALER NEAR YOU
Verify clip has
B
contact against
the spindle rod.
1 888 443 8889
Scan to Watch the
Instructional Video:
Insert wire between
C
pegs in the spindle
block.
WWW.SUR PRO.COM
Advertisement
Table of Contents
Summary of Contents for Sur-Pro WIT110
- Page 1 SurPro Wire Tying Machine (WIT110) User Manual Step 1 Set up wire and clip as illustrated below. Ensure wire is fully inserted. Scan to Watch the Instructional Video: Position wire Verify clip has Insert wire between against the slot. contact against pegs in the spindle the spindle rod.
- Page 2 Step 2 Lift handle and turn counterclockwise until switch is firmly depressed. Motor will activate when the switch is depressed, and the tie will be made. The handle must be firmly depressed against the switch to activate. Step 3 Turn handle clockwise to release the switch.
Need help?
Do you have a question about the WIT110 and is the answer not in the manual?
Questions and answers