P3 International MK5 Installation Manual

MK5/6 Installation Guide
Please download the latest
copy of this document from
www.p3cars.com/install
1
3
WARRANTY & LIABILITY:
Neither P3 Cars, nor its
dealers or agents shall be
liable in any way, for any
damage, loss, injury or other
claims, resulting from the
installation or use of this
product. By purchasing or
installing this product, you
assume all liability of any
kind connected with the use
and/or application of this
product. If you are unsure
that you can safely install and
use this product, consult a
quali ed installer or
mechanic. The warranty on
this product covers only the
5
product itself for a period of 6
months from the date of
purchase, and it will be at our
discretion to repair or replace
the a ected parts. No user
serviceable parts inside.
Warranty will be voided if
product shows physical
damage.
Open the driver's side door and
remove the cover to the fuse box.
Thread gauge connection cable
through the vent opening and out the
fuse box.
Push on the bottom corners of the vent
to firmly secure into place.
2
Use your fingers to push out the lower
left corner of the vent and insert a
screw driver to pop out from the bottom
up.
4
Pull the entire cable through the fuse
box and snap the new vent into place
starting at the top.
6
Connect the cable to the control unit.