ELECTRIC EDGER + TRENCHER 12-AMP | 2-TOOLS-IN-1 OPERATOR’S MANUAL Model SJEDGE7-RM A Division of Snow Joe , LLC ® Form No. SJ-SJEDGE7-RM-880E-M-V1 IMPORTANT! 5. Use personal protective equipment – Always wear eye protection. Protective equipment such as dusk mask, non- Safety Instructions skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Visit sunjoe.com to purchase this extension cord 5. To reduce the risk of rebound (ricochet) injury, work going online or, to order by phone, call 1-866-SNOWJOE away from any nearby solid object such as a wall, steps, (1-866-766-9563).
® ® Table 1. Method of Securing Extension Cord at 1-866-SNOWJOE (1-866-766-9563). Only identical replacement parts should be utilized for repairs. This will Cord set Appliance cord ensure that the safety of the power tool is maintained.
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow Keep bystanders and children all instructions in the user...
Know Your Electric Edger + Trencher Read the owner’s manual and safety instructions carefully before operating the electric edger + trencher. Compare the illustration below to the electric edger + trencher in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
® ® 2. Insert the bolt through the hole and tighten the knob fully 1-866-SNOWJOE (1-866-766-9563). locking the two shafts in place (Fig. 3). NOTE: Do not discard the shipping carton and packaging NOTE: When first assembling the shaft to the trencher...
Operation 3. Push in the front guide wheel arm, check to ensure the front guide wheel arm has located into any of the pre- allocated positions. Ensure the head of the bolt securing Cutting Depth Adjustment the front guide wheel arm is resting flat on the surface of the wheel arm (Fig.
Page 9
3. Secure the loop onto the extension cord restraint hook 4. To switch OFF, release the ON/OFF trigger switch (Fig. 10). then connect the extension cord to the appliance cord (Fig. 9). CAUTION! Do not force the trigger switch without first pressing the safety lock button.
4. There is no need to remove the inner flange, although on WARNING! If you must edge under conditions that reassembly the area of the inner flange must be free of cause the blade chamber to become clogged, release trigger, foreign particles (dirt, etc.).
Snow Joe ® recommended for use with this tool could be hazardous. Sun Joe customer service center at 1-866-SNOWJOE (1-866- ® • Regular cleaning and maintenance of you edger + trencher 766-9563). will ensure efficiency and prolong the life of your machine.
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563).
Page 13
To obtain a replacement part or product, please visit Some states do not allow exclusions of incidental or consequential snowjoe.com/help or email us at help@snowjoe.com for damages so the above exclusions may not apply in all states. This instructions. Please be sure to register your unit beforehand warranty may give you specific legal rights in your state.