Universal Remote Control HomeSet C100 Quick Setup Manual page 6

6
From a PC, Mac, Tablet or Smartphone Log In to
the HomeSet Programming Portal.
www.HomeSetHome.com/guru/
Password is:
About the Status LED, Power LED and Wi-Fi LED
After the C100 Hub has been correctly installed on the Wi-Fi network, the Status
LED will be solid
blue, and the Wi-Fi LED will be one of the following colors:
Solid Blue
Solid Green
Solid Yellow
Solid Red
Blinking Red
If your C100 Hub is using Wired Ethernet, and has been successfully set up, the
Status LED will be
be blue, and the Wi-Fi LED will be off.
homeset#1
red (until a program is downloaded to it), the Power LED will be
Connected to Wi-Fi, excellent signal strength.
Connected to Wi-Fi, good signal strength.
Connected to Wi-Fi, fair signal strength.
Connected to Wi-Fi, poor signal strength.
Error connecting to Wi-Fi.
(until a program is downloaded to it), the Power LED will
red