Eastsign 1. Information Eastsign Roll Slitters is possible to slit most kinds of material such Polyester, PVC Banners & Mesh, Vinyl, Single or Double-sided Adhesive Tape, Reflective Sheetings, Application Tape, Electrical Tape, Paper Rolls, Masking Tape, Window Film, Photo Paper. Blade holder is driven by spiral shaft, which width accuracy is up to 1mm."Auto”...
Eastsign 2. Specifications Model RS-1800R RS-3300R Max Media Loading Width 2000mm or 78" 3300mm or 130" Max Loading Weight 400kg or 880lb Max Diameter of Blade 300mm or 11.8" Max Cutting Diameter 250mm or 10" Max Diameter of Media 350mm or 13.8"...
Eastsign 4. Control Panel Instruction 4.1 Control panel on machine body [1] Number Pad ‒ Input number to move [4] Esc ‒ Cancel input number or stop the the blade or change the parameter machine to move [2] Left ‒ Move blade to the left [5] Right ‒Move blade to the right...
Eastsign 5. Installation 5.1. Open wooden crate and loosen all bolts (under machine) which fasten the machine to pallet. 5.2. Unload the machine to clean, flat and dry concrete open indoor space. There should be enough room for loading and unloading roll material on the right of the machine.
Eastsign 7. Operation Guide 7.1. Cutting Only 7.1.1 Before loading the media, check if the blade just touches the plastics tube. If the blade cut though plastic tube, steel shaft may damage the blade. Adjust the screw under the handle to protect the blade.
Reserve at least 1m working space around the machine for operation and at least 2m (RS -1800R) or 3.5m (RS-3300R) on the right side of the machine for loading or unloading. 8.2. Electricity of equipment is 220V, 50HZ, single phase. If power supply is 110V inform Eastsign to add transformer in advance.
When filing the each claim the buyer must provide details of problem and serial number with clear pictures or video. Eastsign shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, abuse, accidental damage, modification, improper wiring, improper repair, incorrect repair or improper installation procedures.
Eastsign. The warranty loses all its effects when any equipment or devices or supplies not provided by Eastsign is installed on the Machinery, when the Machinery is modified without prior written approval of Eastsign.