Advertisement
Advertisement
Table of Contents
Related Manuals for NET Yeastar TA1610 V3 FXO
Summary of Contents for NET Yeastar TA1610 V3 FXO
- Page 1 Installation Guide Yeastar TA1610 V3 FXO Gateway December 10, 2019...
- Page 2 Contents Safety Disclaimers and Installation Warnings....................... 3 Packing List................................4 Hardware Overview..............................5 Connect Yeastar TA Gateway..........................7 Connect the TA Gateway (Frame Ground)......................8...
- Page 3 Safety Disclaimers and Installation Warnings To avoid unexpected accident, personal injury or device damage, read the safety disclaimers and installation warnings. Power • Use only the power cord provided with the Yeastar TA device. • Keep the power off during the installation. •...
- Page 4 Packing List Upon receiving Yeastar TA 1610 gateway, you can open the package and check if all the items are supplied as per packing list. Note: If there are any problems, contact your provider. Table 2: Packing list Item Unit Description TA1610 Device unit.
- Page 5 Hardware Overview Front panel Table 3: Feature Description Press and hold for 7 seconds to reset to factory defaults. ① Reset Button Note: Do NOT press this button for a long time, or the system would break down. Indicates the power status. ②...
- Page 6 TA1610 Installation Guide | 3 - Hardware Overview | 6 Back panel Table 4: Feature Description ⑧ RJ21 FXO Ports For connection to interfaces with an RJ21 to RJ11 cable. ⑨ Power Switch Press this button to switch on/off the device. ⑩...
- Page 7 Connect Yeastar TA Gateway Follow the steps to connect Yeastar TA1610 FXO VoIP gateway. 1. Connect TA gateway to the Internet LAN port can be connected to router or PBX. 2. Connect TA gateway to the PSTN FXO ports can be connected to PSTN. 3.
- Page 8 Connect the TA Gateway (Frame Ground) Yeastar TA1610 FXO VoIP gateway supports ground protection. Follow the instructions to connect the TA gateway to the ground. Warning: • The ground wire must be installed by the service person. • Proper grounding (connection to ground) is very important to reduce the risk to the user of electrocution or to protect the TA device from the bad effects of external noise in the case of a lightning strike.
Need help?
Do you have a question about the Yeastar TA1610 V3 FXO and is the answer not in the manual?
Questions and answers