Page 1
SLBBG10 3-in-1 Portable Crib for Newborn Baby Baby Bedside Sleeper and Toddler Play Pen...
Page 2
IMPORTANT! Please read all instructions before assembly and use of product. Keep instructions for future use. IMPORTANT: RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. WARNING: BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN. WARNING: This product is intended for use for babies aged between 0 and 6 months, weighting up to a maximum of 9kg.
Page 3
• The product must always be placed on a horizontal surface. Never leave the product on an inclined surface with the child inside of it. • Children must not be permitted to play without supervision near the product. • Do not use the product without the frame. •...
Page 5
ASSEMBLING THE CRIB 1. Open the frame leg (fig.1), position the frame with fabric lining as showed in (fig.2.) 2. Fix the central supporting structure to the 2 legs as illustrated in figure 3. The CLICK of the pivot indicates correct fixing of the structure (fig.4). 3.
Page 6
WARNING: Check to make sure that all of the fasteners have been correctly attached and that the zips are closed and locked right to the end of their travel. HEIGHT ADJUSTMENT OF THE COT The crib can be adjusted to different height positions. In order to adjust the height, pull the adjustment lever upwards and lift the crib to the desired position (fig.11).
Page 7
BEDSIDE SLEEPING MODE The crib can be used next to parents bed (Bedside Sleeping Mode). WARNING-IMPORTANT FOR THE SAFETY OF YOUR CHILD This method is only possible with bed types that comply with all of the conditions described in this paragraph. In particular the side support of the crib should always be put close to the parent’s mattress and the mattress should always be aligned with the height of the side support for restraint of the crib.
WARNING • Product use is only permitted with beds and/or mattresses with straight sides. Use of the product with round beds and/or mattresses or water beds is not permitted. • When the product is used in the “Bedside Sleeping Mode” (it should always be positioned next to the long side of access to the bed.
Page 9
After each wash check the resistance of the fabric and of the stitching. WARNING: During the removal and/or application of the lining, handle the fabric carefully in order to avoid accidental damage or tears. WARNING: The removal and/or application operations may take a few minutes and should be carried out by an adult.
FEATURES: • Easy and Tool-free Assembly • One hand Locking Mechanism • Easy to Move with Locking Wheels • Easy Compact Fold • Removable Full-Size Bassinet • Lightweight and Portable Design • Easily Take it on Trips to the Park or Beach •...
Page 12
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...
Need help?
Do you have a question about the BABY SLBBG10 and is the answer not in the manual?
Questions and answers