Related Manuals for Rohnson R-7500 NEXT GEN
Summary of Contents for Rohnson R-7500 NEXT GEN
- Page 1 Digital Touch Control Kettle R-7500 NEXT GEN Instructions Manual Digital Touch-Control Kettle R-7500 NEXT GEN CONGRATULATIONS ON PURCHASING DIGITAL TOUCH-CONTROL KETTLE...
-
Page 2: Safety Precautions
Digital Touch Control Kettle R-7500 NEXT GEN PLEASE READ THIS USER GUIDE CAREFULLY BEFORE OPERATING YOUR DIGITAL TOUCH CONTROLKETTLE AND KEEP IT FOR FUTURE REFERENCE FOR HOME USE ONLY NOT FOR COMMERCIAL USE. SAFETY PRECAUTIONS When using any electrical appliance, basic safety precautions should always be followed including the following: •... - Page 3 Digital Touch Control Kettle R-7500 NEXT GEN • Check the power cord and plug regularly for any damage. If the cord or the plug is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid an electrical hazard •...
- Page 4 Digital Touch Control Kettle R-7500 NEXT GEN • Do not place the kettle or its base on a wet surface or into any liquid. Do not operate it with wet hands Should the kettle become wet, unplug the cord from the wall and dry the kettle thoroughly with a cloth •...
- Page 5 Digital Touch Control Kettle R-7500 NEXT GEN • Do not switch on unless the kettle contains at least 2 cups of water • Remove the kettle from its base before filing or pouring • When opening the lid after boiling, position the id so that steam is directed...
-
Page 6: Getting Started
Digital Touch Control Kettle R-7500 NEXT GEN The maximum water level is marked inside the kettle. Marked as “MAX 1.5L”. The minimum water level is marked inside the kettle too. Marked as “MIN 0.5L”. GETTING STARTED Remove all packaging from the DIGITAL TOUCH CONTROL KETTLE Before using your kettle for the first time, fill the kettle to the "MAX"... - Page 7 Digital Touch Control Kettle R-7500 NEXT GEN • Unwind the length of cord required to reach the mains electrical outlet. Ensure the cord does not hang over the work surface edge • Remove the kettle from the base • Open the lid. Fill the kettle with cool water, between the MIN and MAX markings located inside the kettle •...
-
Page 8: Keep Warm Function
Digital Touch Control Kettle R-7500 NEXT GEN • Do not fit the kettle backwards as water might get into and onto the control area. If this happens, let the kettle dry thoroughly before next use. We recommend placing it in a dry, warm area for 12 hours. - Page 9 Digital Touch Control Kettle R-7500 NEXT GEN Unique count down / count up digital thermometer Preset temperature controls Warming functions Eco function Preset menu Power button button STANDARD BOILING Press this button to switch on the kettle/wake it from standby mode. The screen will display"ECO"and 100 on the digital tube, then start heating up without using...
- Page 10 Digital Touch Control Kettle R-7500 NEXT GEN After the machine turn to the shut down mode, press one time the button, and then turn to the standby mode, shows the water temperature in real time. Beep tip and without beep tip exchange follow as below: Long press the “mode”...
- Page 11 Digital Touch Control Kettle R-7500 NEXT GEN Press and hold this button three time, hold it for 2 seconds and hear a beep then automatically to heat your water/milk to 40℃ and keep it warm for approximately 90 minutes (WARM FUNCTION).
-
Page 12: Care And Cleaning
Digital Touch Control Kettle R-7500 NEXT GEN THE PERFECT TEMPERATURES TIPS AND TRICKS TIPS AND TRICKS Use the optimal water temperature to brew perfect hot drinks. The correct water temperature helps you extract just the right amount, avoiding strong or weak brews. It also ensures that the taste you get, is exactly as it should be. -
Page 13: Exterior Cleaning
Digital Touch Control Kettle R-7500 NEXT GEN EXTERIOR CLEANING Let the kettle cool down before cleaning. Before you clean your kettle, unplug and make sure all water is poured out from the kettle. Do not immerse the appliance or its base in water or any other liquid, or hold it under a running tap to clean. -
Page 14: Troubleshooting
Digital Touch Control Kettle R-7500 NEXT GEN WARNING: IF THE KETTLE USED FOR WARMING MΙLK THE INTERIOR MUST BE CLEANED WITHIN 10 MINUTES OF HEATING THE TO AVOID DAMAGE TO THE KETTLE. STORAGE • Ensure that all parts are dry before storing. - Page 15 Digital Touch Control Kettle R-7500 NEXT GEN damaged 3. Thermostat is damaged Unable to switch off 1. Too much limescale 1. Remove the limescale after boiled at the temperature 2. Send to your nearest Service sensor Centre for maintenance 2. Machine failure Switch off before boiled 1.
- Page 16 Digital Touch Control Kettle R-7500 NEXT GEN Select your desired function only once the temperature has dropped below 100℃ Abnormal zero-cross Cancel function selection by signal pressing the POWER button. Send to your nearest Service Centre IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
Need help?
Do you have a question about the R-7500 NEXT GEN and is the answer not in the manual?
Questions and answers