Mania YCC365 Plus Instructions

INSTRUCTIONS
IP CAMERA
COMPONENTS
•
IP camera
•
Charging cable
•
Reset button needle
•
Module for wall fixation

INSTALLATION

1. On your smart device, search for the
application »YCC365« (Google Play Store,
Apple App Store).
2. After successful registration in the app,
press "+" in the top right corner of the screen
and select "INTELLIGENT CAMERA" and then
"ADDITION OF AP HOTSPOT".
3. Connect the device to the power supply with
a charging cable (either in the classic socket
or in the device that contains the USB port).
When the IP camera is plugged into power,
it will automatically turn on.
4. Insert the reset needle into the RESET on the
top of the device and hold for 5 seconds or
longer, until the device notifies you that the
Camera is reset.
5. In the YCC365 application, follow the steps
and select the CloudCam
automatically generated by the camera
when it is connected. In this step, you need
to make sure the device stays connected
with your smartphone !!
6. In the next step, sign in to your home Wi-Fi
network (2.4G) and confirm your password.
7. In the last step, the application will connect
your device to the Wi-Fi network and your
phone. If you have not successfully
connected,
Troubleshooting.

SIMPLE USE OF THE APPLICATION

•
YCC365 app and IP camera allows video
sharing with your friends, and the camera
also receives
After selecting a camera in the application,
you can simply move the camera by sliding
your finger around the screen.
•
IP camera also supports recording on TF or.
Micro SD Cards. Insert the card into the hole
at the top of the camera (next to the small
RESET hole).
•
You can also follow the picture online at:
•
https://www.ucloudcam.com
•
To sign up, use the same user and password
as YCC365.
network
read the chapter
and emits sound.