Selcom Security SEL-324V Slim Manual

TURNING THE DEVICE ON AND OFF

The device is turned on by connecting the power supply to the connector and to the power
supply network (the red indicator lights up). Simultaneously with turning on the power of the
device, noise is switched on, as evidenced by one long and two short sound signals.
To turn off noise interference, press the A button on the remote control (one long beep). In
this case, the device goes into standby mode. Re-enable noise interference by pressing button
B on the remote control (two short beeps).

INDICATORS AND SOUND SIGNALS

Status
ON indicator
Lights up red
Remote indicator
Flashing yellow
Sound signal
One long and two short
One long
Two short beeps

RECOMMENDATIONS FOR USE

ULTRASONIC EMITTERS ARE DIRECTIONAL, THEREFORE, IN ORDER TO EFFECTIVELY SUPPRESS
SOUND RECORDING DEVICE, IT IS NECESSARY TO DIRECT THE DEVICE WITH EMITTERS TOWARDS
THE SUPPRESSED OBJECT, AVOIDING OBJECTS BETWEEN THE SUPPRESSOR AND SOUND
RECORDING DEVICE.
DUE TO TECHNOLOGICAL LIMITATIONS, SOME RECORDER DEVICES CAN NOT BE SUPPRESSED,
"
WHICH IS NOT A MALFUNCTION OF SEL-324V SLIM

WARRANTY

Warranty period - 12 months from the date of sale. The service life is 5 years.
In case of failure of the device during the warranty period, the owner has the right to warranty repairs. In
case of violation of seals, mechanical damage to the case or controls, the right to warranty is lost, and
repairs are carried out at the expense of the owner.
www.selcomsecurity.com
Event
Instrument Power On
A signal is being received from the remote control
The power is on.
Noise is turned on, suppression occurs
Noise Interference Off
Noise is turned on, suppression occurs
".
Jammer of
Microphones and
Audio Recorders
SEL-324V «Slim»
Manual
2020
www.selcomsecurity.com