Download Print this page

Pyle HURTLE PSCOOT15 User Manual page 5

Electronic smart scooter

Advertisement

4. Battery Maintenance 
 
This is information on how to charge and maintain  the battery.    Please follow  these directions if you'd like to extend the 
battery life to its longest potential. 
 
4.1 Low Battery 
When the power indicator light is red light and flashing, you must stop driving and charge your unicycle. The unicycle will 
begin to skip/stop when it is running out of battery, so it is important that when it is low battery that you stop driving 
and begin to charge.    Accidents/injuries could occur if you force the unicycle to drive while it is low battery. 
Do not use the battery/unicycle, if: 
1. It begins emitting a smell or gets too hot. 
2. Any liquid/materials leak out. 
DO NOT remove/replace the battery at any time; this can only be done by an experienced/designated technician. 
Don't touch the battery if any liquid/materials leak out. 
Do not let any children or animals near the wiring or unicycle while it charges.    Parental supervision is necessary. 
 
4.2 Charging 
Make sure the unicycle is completely dry before charging. Open the charging cover of the unicycle. 
Plug  the  socket  of  the  charger  to  the  power  supply  (110‐220V;  50‐60Hz),  make  sure  the  green  indicator  light  of  the 
charger is on, and then connect the charger with the unicycle.   
When the indicator light on the charger turns red to green, that means the battery is full charged. Overcharging will do 
harm to the battery, so please make sure to unplug the unicycle from the charger when it is done. 
Please pay special attention to use the correct plug; using the wrong one will damage the battery or the unicycle. 
The suggested charge time for the unicycle is 2 hours; taking the unicycle off of the charger before it is fully charged will 
shorten the lifecycle of the battery. 
Do not charge when the charge port is moist or damaged. 
 
4.3 Battery   
  To keep the unicycle in the best efficiency, make sure the battery works in the suggested working temperature range (‐15 
to 40 degrees). 
  Make sure the unicycle is in the recommended temperature when charging, extreme 
Cold or heat, charging time will be longer and maybe cannot be full charged. 
 
4.4 Specifications 
 
Item 
Battery Charge Time 
Voltage 
Max Charge 
Standard capacity 
Storage Temperature 
Storage humidity   
Size (W x H) 
Weight 
Power Supply 
Motor 
Weight Limit 
 
Parameter 
1.5 hours 
59.2V 
42V 
2200mAh 
0‐40 C    /    6 month 
5%‐95% 
17.7" x 15.5" 
24.2 lbs. 
110/220V 
350 Watt 
275 lbs. 

Advertisement

loading

This manual is also suitable for:

Hurtle pscoot22