Advertisement
OPERATION
1.
Put the cooling pad on a flat surface. Lift the latch up and place your laptop onto the
non-slip surface of the cooling pad.
2.
Insert one end of the USB cable into the cooling pad and the other into the USB port
of your computer. Ensure the connection is unobstructed.
Roll the fan speed dial until the desired fan speed is reached.
3.
Adjust the angle and height of the cooling stand by extending the legs. The cooling
stand can be configured to two different heights as shown below. Press the light
mode switching button to switch between different lighting modes.
Note:
•
This cooling stand is suitable for laptops with a screen size of up to 19 inches.
•
Both USB ports support input and output. They may be used to connect USB
flash drives and peripheral devices to your laptop.
Lighting modes
•
8 solid colour modes
•
RGB shading
•
RGB breathing
•
Cyan breathing
•
7-colour breathing
•
7-colour flow mode
•
7-colour breathing shading
Advertisement
