1. Check the pack and make sure you have all of the parts listed above. If not, contact your local LAP store who will be able to help you. 2. Decide on an appropriate location for your spotlight (see Siting Instructions below).
Page 5
Setting up the Sensor • The operation of the motion sensor is adjustable within certain parameters. For the limits, please refer to the technical specifications. • Pull down the cover and adjust the sensor by simply rotating in direction of arrows using the flat screwdriver.
Always switch the unit off and allow to cool before cleaning. • LED lamp is non-replaceable light source, if the lamp is damaged ,the luminaire must be changed. Technical Specifications Model name: 2617S-PIR Supply Voltage: 220-240V~, 50Hz Bulb Type: LED 9W Mounting Height : 2.5 meters...
Page 7
As of 1 January 2005, changes to the Building Regulations affected domestic electrical installations in England and Wales. You don’t need to be a qualified electrician to make changes to your home’s electrical system, but the work must be done in accordance with the standards in the Regulations. You do not need to notify your Local Authority if you do minor electrical work such as:- •...