Summary of Contents for Algeos Freezpen
- Page 1 STEP 1 Unscrew to open the Freezpen • Open the cartridge pack containing the cartridge and the filter (the small • round part that also pierces the cartridge) Carefully pick up the filter with the tweezers provided with the Freezpen •...
- Page 2 Place the cartridge on the filter and press it down • Screw down the upper part of the Freezpen lightly until you feel it stop. Now • screw firmly with both hands to secure the cartridge. The last twist will pierce the seal of the cartridge.
- Page 3 Pull down to remove the protective lid over the nozzle. Ensure the nozzle is • firmly screwed to the Freezpen and there are no gaps between the nozzle and the Freezpen. Press the button for a few seconds until there is a continuous flow from the nib.
- Page 4 HOW TO CHANGE A CARTRIDGE STEP 1 Unscrew the nozzle completely • STEP 2 Unscrew the upper and lower part of the Freezpen and open to release the • cartridge. Ensure the loading cavity is empty of all remaining parts (cartridge and filter) •...
- Page 5 3) Ensure the lid that fits over the nozzle has been taken off. 4) Ensure no residue or particles are obstructing the nozzle exit. 5) Ensure the Freezpen is held nose down like a writing pen so that the nitrogen flows downwards.
Need help?
Do you have a question about the Freezpen and is the answer not in the manual?
Questions and answers