Adding Measurements - BenQ T3300v Quick Manual

2. A pictogram of the default body mark with a transducer indicator displays on the image. If you wish
to change the body mark, select one from the
3. Touch anywhere on the image, drag the transducer indicator to the desired location on the body
mark, then release your finger to place the indicator.
4. Touch anywhere on the image, move to rotate the transducer indicator, then release your finger to
fix its angle.
5. Touch and hold the pictogram, and drag it to the desired location on the image.
NOTES
• You can change the default body mark by touching
Application) > Edit
• To delete the body mark added, touch

Adding Measurements

Measurements accompanying ultrasound images supplement other clinical procedures available to the
attending physician. You can perform as many measurements as needed.
On the real-time imaging screen, touch
scan mode selected. To perform a single type of measurement, touch the corresponding button.
To perform a set of predefined measurements from the Calculation Package, touch Calc
When you are measuring, the indicators/lines display in yellow, allowing you to adjust as many times as
needed. When you are done with measuring, use any of the following methods to complete the
> select an option.
BDMK
Freeze
BDMK menu that appears.
> Settings
> Erase.
to display a set of measurement buttons based on the
22
> BDMK > (Default BDMK for