Page 1
InstallatIon GuIde PP1 Panel-Mount Reader Scope the guide explains how to install standard specification PP1 panel-mount readers. Customer specific variants require an addendum to this guide. Specifications PP1-EM1 PP1-HT1 PP1-HT2 VP1-DP1 Technology: EMxxx Hitag 1 Hitag 2 DualProx Size (mm): 55 x 55 x 16 (H x W x D), 48 mm mounting hole centres.
Page 2
Serial Data Output Format Select: The output format is selected by connecting ‘Format Select’ to either Ground or +VDC as follows: Models Connect to Ground Connect to +VDC PP1-EM1 10-Digit Clock & Data 26-Bit Wiegand PP1-HT1 PP1-HT2 PP1-DP1 26-Bit Wiegand...
Page 3
InstallatIon GuIde Power & Testing onnect power to the controller and ensure that the led lights red. Present a valid card to the reader and check that the led blinks green. ensure that the led responds to the access controller as expected. this will depend upon how you have wired the reader and the way in which the access controller operates.