Advertisement
2. Connect oating power cord.
3. Place the unit in the water. Release the Pool Cleaner and let it sink to the oor of
the pool. Make sure that the oating cable is free of any obstructions.
4. Start: Turn the power supply ON (115V AC 60HZ). One of the three modes light
will be on. Press the button for the mode and time you want to run, then press
button, the Pool Cleaner will now operate.
5. Mode switching: Press
the cleaner.
6. Indicator Lights:
On/O Button
Running Time Indication:
•
Red light twinkling means the cleaner has been set for 2 hours
•
Green light twinkling means the cleaner has been set for 3 hours
•
Blue light twinkling means the cleaner has been set for 5 hours
1
button, choose the mode, press
All Purpose Clean
Floor Clean Only
2
button to start
Running Time
www.SereneLifeHome.com
5
Advertisement
