Control Panel; Daily Use - Zanussi ZNFN18FS1 User Manual

CONTROL PANEL

1. Temperature indicator LED
2. FastFreeze indicator
3. FastFreeze button
4. Temperature regulator
ON/OFF button
SWITCHING ON
1. Insert the plug into the wall socket.
2. Touch the temperature regulator button if all
LED indicators are off.
SWITCHING OFF
Keep touching the temperature regulator button for
3 seconds.
All indicators light off.
TEMPERATURE REGULATION
To operate the appliance, touch the temperature
regulator until the LED corresponding to the
required temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
Recommended setting is 4°C.
1. Touch temperature regulator.
Current temperature indicator blinks. Any time you
touch the temperature regulator, the setting moves

DAILY USE

POSITIONING THE DOOR SHELVES
To permit storage of food packages of various
sizes, the door shelves can be placed at different
heights.
1. Gradually pull the shelf up until it comes free.
2. Reposition as required.
8
1 1 2 2
4 4 3 3
by one position. The corresponding LED blinks for
a while.
2. Touch the temperature regulator until the
required temperature is selected.
The set temperature will be reached
within 24 hours. After a power failure
the set temperature remains stored.
FASTFREEZE FUNCTION
The FastFreeze function is used to perform pre-
freezing and fast freezing in sequence in the freezer
compartment. This function accelerates the freezing
of fresh food and, at the same time, protects food
products already stored in the freezer compartment
from undesirable warming.
To freeze fresh food activate the
FastFreeze function at least 24 hours
before placing the food to complete
pre-freezing.
To activate FastFreeze function press the
FastFreeze button. The FastFreeze indicator
switches on.
This function stops automatically after
52 hours.
It is possible to deactivate the function at any time
by pressing FastFreeze button again. The
FastFreeze indicator switches off.
DOOR OPEN ALARM
If the fridge door is left open for approximately 5
minutes, the sound is on.
During the alarm the sound can be muted by
pressing any button. The sound switches off
automatically after around one hour to avoid
disturbing.
The alarm deactivates after closing the door.