If anything is missing please contact your distributor immediately. General Description The SHAW AcuLoop is a 4 digit, LED, plug in display that connects directly to the AcuDew dewpoint transmitter. This plug in display is self contained, robust and reliable. Easy to install and lightweight, the AcuLoop is easily supported on the AcuDew dewpoint transmitter body and is adjustable to 210 degrees on its stem and 360 degrees on its axis.
4 - 20 mA span configurable using the two button layout on the display • M12 connection for use with the AcuDew dewpoint transmitter and connecting cable 2.0 Connecting the AcuLoop to the AcuDew Dewpoint Transmitter BEFORE YOU BEGIN - DISCONNECT THE POWER If the AcuDew is...
3.0 AcuLoop Plug In Display Module Setup Instructions TO POWER THE AcuLoop FOLLOW THE INSTRUCTIONS IN SECTION 3 OF THE AcuDew MANUAL REMOVE FRONT COVER TO ENTER THE MENU, PRESS BOTH BUTTONS FOR TWO SECONDS ENTER THE MENU Adj- SET DECIMAL POINT...
Replace the glass cover and screw hand tight. 5.0 Rotating the Display on its Stem Not Controlled if Printed Not Controlled if Printed The AcuLoop can be rotated for optimum viewing, with adjustable orientation to 210 degrees on its stem. 6.0 General Assembly Diagram 210° Rotation 210°...
8.0 Guarantee All Shaw Moisture Meters products are guaranteed for two years from the date of purchase, some exclusions are as follows: removing protective guard from any sensor, subjecting sensor to shock or black list gases e.g. caustic and acidic gases like...