Advertisement
Table of Contents
Solar powered data radio with field-selectable analog inputs
Warning:
Check battery polarity.
Installing incorrectly
can result in product failure.
OA RH/T
PLUG
PAGE 1
INSTALLATION MANUAL - T8-LTE-S
WIRING/CONFIGURATION
SET SWITCHES
TO MATCH SENSOR
OUTPUTS
-
-
EXTERNAL SENSOR WIRING:
V+ (OUT)
X
INPUT
COMMON
V+ (OUT)
INPUT
COMMON
FOR SPECIFIC INSTALLATION REQUIREMENTS
V+ (OUT)
INPUT
COMMON
X
MIRATRON
866-417-5008
INPUT 1
mA V TH
10 SEC
10 MIN
INPUT 2
PROG
mA V TH
RATE
BATTERY
Warning
BATTERY
Warning
THERMISTOR
10K TYPE 2 or 3
TYPICAL
POWER
3-WIRE
0-5/10V
SENSOR
GROUND
CONSULT SENSOR INSTRUCTIONS
TYPICAL
POWER
2-WIRE
4-20mA OUT
SENSOR
503-352-0654
www.miratron.com
MAIN
POWER
SWITCH
ON
OFF
TX ACTIVE
CHARGING
+
+
SOLAR
PLUG
Advertisement
Table of Contents
Summary of Contents for Miratron T8-LTE-S
- Page 1 INSTALLATION MANUAL - T8-LTE-S Solar powered data radio with field-selectable analog inputs WIRING/CONFIGURATION Warning: Check battery polarity. Installing incorrectly can result in product failure. MAIN POWER SET SWITCHES SWITCH INPUT 1 TO MATCH SENSOR OUTPUTS mA V TH 10 SEC...
- Page 2 Switch Selectable mA setting for 4-20mA devices V setting for 0-5v/0-10v devices Temperature setting for 10k-ohm thermistor, type 2 or 3 (Jumper selectable) RH/T Serial interface for Miratron integrated RH/T sensor probe option Configuration/Setup Power On/Off switch Transmit rate Switch selectable, 10 sec or 10 min fixed or programmable automatic interval...
Need help?
Do you have a question about the T8-LTE-S and is the answer not in the manual?
Questions and answers