NCE NCEG30-700 Manual page 13

Tub clean
Select the Tub clean program to clean the barrel of the washing machine.
Do not put any clothes in during Tub clean program.
Hot
1. Open the machine door, add detergent or washing machine cleaning agent in
tub and then close the door.
2. Press the POWER button.
3. Press PROGRAM and choose Tub clean program.
Automatically choose 95 hot water, two rinse cyclesand one time spin process.
4. Press START / PAUSE button.
After door locked, program will start properly.
All programs, including the RINSE+ cannot be added
Do not put clothes in the washing machine under this Tub clean
program.
Notice
It is recommended that you use the Tub clean
program once a month to clean the barrels in the
washing machine.
WASH 3.0KG
19
Buttons and functions
NCEG30-700H
Hot
1. POWER
Use POWER button to turn on or
off the washing machine.
2. START/PAUSE
Use START/PAUSE to start or stop
the washing machine.
3. DRYING
Press the DRYING button, and the
drying indicator on the control panel
is on, indicating that the drying
function is selected. While the
indicator is off, indicating that the
drying function is not selected.
4. RINSE+
After selecting the washing program,
press the RINSE+ button to
increase the number of rinsing times.
Apply same method to increase spin
time or drying time
If the power of the washing machine is interrupted during operation,
the water may be too high or too hot to open the door temporarily.
If the washing machine stops running due to power interruption during
Notice
washing or rinsing, please open the door carefully for safety.
WASH + DRY 3.0KG
5. PROGRAM / DELAY START
Press the PROGRAM / DELAY
START button to select a washing
program. The program indicator will
display your selection.
(If DELAY START is required,
please press and hold "PROGRAM/
DELAY START" button for 3 seconds
after machine started. When entering
the DELAY START mode, the LED
DISPLAY will show 02 flashing. After
the selected time, the program will
start. Not required to press the
START/PAUSE button.
6. "CHILD LOCK"
After starting, press and hold the
"RINSE+" and "DRYING" buttons
together for more than 3 seconds to
lock or remove the "CHILD LOCK"
mode. CHILD LOCK mode, disables
all keys .
7. LED
LED DISPLAY shows washing time
and program information.
20