Subscribe to Our Youtube Channel
Related Manuals for TREBLAB Z7 PRO
Summary of Contents for TREBLAB Z7 PRO
- Page 1 HYBRID ACTIVE NOISE CANCELLATION User’s Manual Please read this manual before using the product...
- Page 2 IN THE BOX 1. TREBLAB Z7 Pro headphones 2. User's manual 3. Round TREBLAB sticker 4. Carrying case 5. Charging USB Type-C cable 6. 3.5 mm audio cable...
- Page 3 Thank you for choosing TREBLAB Z7 Pro! The over-ear headphones with Bluetooth® 5.0 Aptx™ HD and Hybrid Active Noise Cancellation technology provide superior sound quality and the convenience of hands-free operation. STATUS AUX LINE-IN MAIN PORT MICROPHONE CHARGING TYPE-C CHARGING PORT...
-
Page 4: Touch Panel
TOUCH PANEL RIGHT SIDE MICROPHONES MICROPHONES... - Page 5 Function Operation Power on Press and hold the POWER button for 3 sec. Power off Press and hold the POWER button for 4 sec. Battery level Press the POWER button while the headset is on. Discon- Press and hold the Bluetooth button for 3 sec. nect/Pairing Play/Pause Double tap on the Touch panel.
- Page 6 When the headphones are turned on, close Awareness the right earcup with a palm. mode SETTING UP YOUR TREBLAB Z7 Pro Turn ON Press the POWER button for 3 sec. You will hear the sound prompt and, a few seconds later, the “Bluetooth pairing on”...
- Page 7 PAIRING Make sure the TREBLAB Z7 Pro are charged and the 3.5 mm audio cable is not plugged in. Press the POWER button for 3 sec. You will hear the sound prompt and, a few seconds later, the “Bluetooth pairing on”...
-
Page 8: Multipoint Connection
MULTIPOINT CONNECTION The TREBLAB Z7 Pro headphones have a multipoint connec- tion. It allows two devices to be connected at the same time. While you won't receive the input from both devices at the same time, you'll be able to switch from one device to another seamlessly. - Page 9 Ambient Sound mode to hear voices when using the Z7 Pro headphones. When the Z7 Pro are turned on, the ANC mode is enabled automatically. In the ANC mode the green LED on the right earcup is lit up.
-
Page 10: Audio Playback
To adjust the volume, swipe up on the Touch panel to raise the volume and swipe down to lower the volume. To change tracks on the Z7 Pro headphones, swipe forward on the Touch panel to play the next track and swipe backward... -
Page 11: Phone Calls
NOTE: The Z7 Pro headphones are equipped with the proximity sensor in the right earcup. When you take the headphones off, the playback will be paused automatically. When you put the headphones on, the playback will be automatically resumed. PHONE CALLS... -
Page 12: Charging And Battery
USB port. The LED light will turn RED. It takes up to 2.5 hours to fully charge the Z7 Pro. The RED light will turn GREEN when the headphones are fully charged. -
Page 13: Troubleshooting
RESET TO THE FACTORY SETTINGS You can reset the Z7 Pro headphones to the factory default settings by cleaning up the pairing list with the last 8 connected to Z7 Pro devices. Turn on the TREBLAB Z7 Pro headphones. Press and hold the Bluetooth button for 5 seconds. - Page 14 30 feet/10 meters. Disconnect the device from your headphones and remove Z7 Pro from your device’s pairing list. Reset your headphones to the factory settings by following the steps from the previous section. Try to pair again.
-
Page 15: Safety Rules
30 feet/10 meters. Make sure that nothing is blocking the signal between your device and Z7 Pro. Check if the music is pausedCheck if the volume level is set on both th e source device and the headphones. - Page 16 • Avoid exposing the TREBLAB Z7 Pro to extreme temperatures (below 37°F 13°C or above 112°F / 45°C). Extreme temperatures can cause the deformation of the Z7 Pro components, reduce the battery life and the lifespan of your new headset.
- Page 17 https://recyclenation.com/find https://www.cta.tech/Consumer-Resources/Greener-Gadgets In Canada, please visit the links below: https://thinkreuse.net https://www.call2recycle.ca In the UK, please visit the links below: https://www.recycle-more.co.uk/ https://www.recyclenow.com/local-recycling...
-
Page 18: Specifications
SPECIFICATIONS Battery: Up to 45 hours play-time without ANC Up to 30 hours play-time with ANC 900mAh 3.7V, rechargeable Li-Ion Input 5V/1A Charging time: Up to 2.5 hours ANC type: Hybrid (4 microphones) Calling: 2 microphone with ENC technology Voice assistant Supported by tapping on the touch activation: panel and holding for 3 sec. - Page 19 THANK YOU We truly appreciate that you chose TREBLAB as your trusted brand of wireless ANC headphones. Our team sincerely hopes that you enjoy the great sound and seamless usability that the TREBLAB Z7 Pro provide. We love making our customers happy by providing true value with our products.
-
Page 20: Year Warranty
1 YEAR WARRANTY Parts and Labor Warranty. Please visit www.treblab.com to register YOUR product. Manufactured by Productech Z7 Pro WIRELESS HEADPHONES...
Need help?
Do you have a question about the Z7 PRO and is the answer not in the manual?
Questions and answers