Advertisement
Assembly instructions (continued)
3.
Assemble the arm assembly
□ Pull the excess power cord through
the base (J).
□ Screw the arm assembly (E) to top
of the pole-a (F).
IMPORTANT NOTE: Please make sure the
arm and socket face front as shown, if the
arm and socket are not face front, adjust the
arm and socket face front as shown, and then
use the wrench (K) (included) to tighten the
nut from bottom of the base (J).
4.
Assemble the glass shade
□ Remove the socket rings (B) and acrylic
spacers (C) from sockets by unscrewing the
socket rings (B).
□ Place a glass shade (D) over each socket, then
secure with a acrylic spacer (C) and a socket
ring (B).
E
F
Arm
J
K
Socket
D
C
B
5
Advertisement
