Advertisement
Quick Links
SERVICE & INSTALLATION
Compact Motor (Brushed) Systems
In this manual:
• Page 1: How It Works
• Page 2: Important Mounting
Considerations
• Page 3: Mounting
• Page 3:
Plumbing The XLR
Extended Length
Standard Length
• Page 4: Outlet Orientation
• Page 4: XLR Restriction Gauge
• Page 4: Inspecting The XLR Installation
Standard Motor (Brushless or Brushed) Systems
• Page 5: Filter Removal/Reinstallation
• Page 5: Field Service Parts
• Page 6: Filter Replacement
• Page 6: Technical Support
Extended Length
Standard Length
How It Works:
© 2018 Sy-Klone International, all rights reserved.
ENGLIT0000323 C
1
Advertisement
Summary of Contents for SY-KLONE POWERED PRECLEANER XLR
- Page 1 Standard Motor (Brushless or Brushed) Systems • Page 5: Filter Removal/Reinstallation • Page 5: Field Service Parts • Page 6: Filter Replacement • Page 6: Technical Support Extended Length Standard Length How It Works: © 2018 Sy-Klone International, all rights reserved. ENGLIT0000323 C...
- Page 2 Debris can enter outlet when filter is removed. Care should be taken to prevent high pressure water or air from entering the XLR ejection slots during cleaning. © 2018 Sy-Klone International, all rights reserved. ENGLIT0000323 C...
-
Page 3: Engine Compartment
3. The XLR system can be mounted in a variety 40.6 ft-lbs (50 to 55 Nm). of locations and orientations. (See Important Mounting Considerations) 4. A mounting plate is available through Sy-Klone. Universal mounting plate: REC0157. Plumbing The XLR: 1. Turn off master power switch. - Page 4 System is running. If not, an alternate power located. source must be located. b. Airflow out of XLR system ejection ports is strong. c. Fan rotation is counter clockwise when viewed through the inlet. © 2018 Sy-Klone International, all rights reserved. ENGLIT0000323 C...
- Page 5 Motor Assembly Clamp Assembly includes RIC0902 12-Volt Brushed Upper & Lower Clamp Halves, RIC0903 24-Volt Brushed RIC0901 Base & Hardware RIC0904 12-Volt Brushless Rain Cap & Worm RIC0905 24-Volt Brushless Gear Clamp © 2018 Sy-Klone International, all rights reserved. ENGLIT0000323 C...
- Page 6 Replace with When replacing the filter element do not point genuine SY-KLONE filters only. ejection slots at a solid surface in close proximity to Order from your dealer or from Sy-Klone. the slots. Technical Support: Your Dealer: Sy-Klone International Contact your dealer for genuine 4390 Imeson Rd •...
Need help?
Do you have a question about the POWERED PRECLEANER XLR and is the answer not in the manual?
Questions and answers