Advertisement
Please check contents before assembly. If any items are missing or damaged, do not take the unit back to
the store. Please call (416) 597-2291 for customer service and we will save you time by correcting any problems.
The Glider Bench has been conditioned for outdoor use with an oil-based color stain. To maintain the
beauty and life expectancy of the chair, it is highly recommended that you treat the chair with weather
proof coating (teak oil stain or weatherproof coating) once a year.
•
Cover the Bench during harsh weather to keep it from weathering.
•
Rinse any panels with water to clean.
•
When assembling MERRY
with care to avoid any possibilities of damages and/or injuries.
Back Rest
M
E
Classic Glider Bench - MPG-GDB
CARE INSTRUCTIONS
PRODUCTS'™ furniture, please handle all panels and/or hardware
COMPONENTS
R R Y
Front Cross Beam
NOTE: Read all instructions before starting.
page 1
HARDWARE
Screw x 10 Pcs
(M7x60)mm
Bolt x 8 Pcs
(M6x20)mm
Washers x 8 Pcs
Locking Bolts x 8 Pcs
Screws x 2 Pcs
(M4 x 30)mm
6
Allen Key x 2 Pcs
Do not completely tighten any bolts until
the unit is fully assembled and sitting on a
level surface.
v.2.0
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Merry Products MPG-GDB
Summary of Contents for Merry Products MPG-GDB
- Page 1 R R Y Classic Glider Bench - MPG-GDB Please check contents before assembly. If any items are missing or damaged, do not take the unit back to the store. Please call (416) 597-2291 for customer service and we will save you time by correcting any problems.
- Page 2 R R Y Classic Glider Bench - MPG-GDB Step 1: Insert dowelled ends of Back Rest and Front Cross Beam into Left and Right Arm Rests. Secure with Screws (1) using appropriate Allen Key (6). Step 2: Insert Seat into place. Secure with 2 Screws (5) underneath the seat using a Phillips Screwdriver.
- Page 3 R R Y Classic Glider Bench - MPG-GDB Step 3: Assemble Glider Back Cross Beams to Right and Left Glider Legs. Secure with 4 Screws (1) using appropriate Allen Key (5). Step 4: Assemble Glider Brackets and Glider Front Cross Beam to Glider Legs. Secure with Bolt (2), Washer (3) and Locking Bolt (4) using appropriate Allen Key (6).
- Page 4 R R Y Classic Glider Bench - MPG-GDB Step 4: Place the completed Bench portion over the Glider portion. Secure the Glider Brackets to the legs of the Bench using Bolt (2), Washer (3) and Locking Bolt (4) at each leg. Please reference the highlighted area for correct placement of hardware at each leg.
Need help?
Do you have a question about the MPG-GDB and is the answer not in the manual?
Questions and answers