Table of Contents
Advertisement
Quick Links
Fluid Convertible Bike Trailer
Owner's Instruction & Safety Manual
The Fluid Convertible Bike Trailer is a great way to move one or two children around behind your
bike, and has the added bonus of being a stroller which can be used independently of the bike.
The stroller components can be fitted without the need to turn the stroller/trailer upside down.
This product has been created and independently tested when in stroller configuration to comply
with 'AS/NZS 2088:2013 Prams and Strollers – Safety requirements'.
This manual covers very important warnings and safety tips to reduce the risk in using this
product, however whilst not exceeding the limits in this manual you should always ride within your
skills and comfort level. Please read the entire manual including the warnings before assembling
and using this product.
Advertisement
Table of Contents
Summary of Contents for Fluid 9341235252217
- Page 1 Owner’s Instruction & Safety Manual The Fluid Convertible Bike Trailer is a great way to move one or two children around behind your bike, and has the added bonus of being a stroller which can be used independently of the bike.
- Page 2 WARNING TO ASSIST IN AVOIDING INJURY OR DEATH, PLEASE READ ALL INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE ASSEMBLY AND USE. ALWAYS APPLY THE BRAKES WHENEVER IN STROLLER CONFIGURATION AND STATIONARY. DO NOT LEAVE CHILDREN UNATTENDED. SECURE THE CHILD(REN) IN THE HARNESS(ES) AT ALL TIMES. DO NOT CARRY EXTRA CHILDREN BEYOND THE TWO CAPACITY IN/ON THIS STROLLER.
- Page 3 PACKAGE CONTENTS: Trailer body, cover, 2 rear wheels, 1 front wheel, hand bar, safety flag, parking brake, brackets and wrench. Main frame assembly Remove trailer and all components from carton. While trailer is still in folded position, lift both side panels to an upright position. Insert one side plastic panel into another side plastic panel (Refer to diagram).
- Page 4 ASSEMBLE THE BRAKE The foot brake is pre-assembled in the trailer but you need to adjust the brake by following the instructions below. Screw the red parts to the hole show in the below image and lock it. WARNING The brakes must always be applied when used in stroller configuration and the stroller is not moving When in trailer configuration and attached to a bike, ensure both brakes are released prior to riding.
- Page 5 Installing wheels Place the wheel hub on the axle by simply pushing in the wheel until it snaps in place, so the wheel cannot be removed. To remove the wheels, lift back of trailer up and simply push on the push buttons located on the axle and remove the wheel (See diagram).
- Page 6 The cover is designed to keep passengers and cargo dry and warm in inclement weather and protects from flying debris. The rain PVC cover can be rolled up to allow for added ventilation in hot weather. Hook & Loop closures keep the rain cover out of the way when rolled up.
- Page 7 ●Put one strap over each shoulder and connect to the D-RING of the crotch strap. ●Adjust shoulder & crotch straps to be snug and secure. ●Fasten lap belt and tighten securely. WARNING Never ride without securing passengers in the Five point Harness.
- Page 8 5) Slide the ends of the handlebars into the mounting tubes, align the holes, and insert the lock pins. INSTALLING THE FRONT STROLLER WHEEL The trailer comes with a stroller kit that allows for easy stroller when it is not attached to the bicycle.
Need help?
Do you have a question about the 9341235252217 and is the answer not in the manual?
Questions and answers