Advertisement
36IN 100L GOLD SLEIGH
ITEM NUMBER: TY-A-100L/2W-3(36)
A. Side of the Panel
B. Runner
Qty：2pcs
Qty：2pcs
D. Bow-
E. Plastic Ties
Qty：1pc
C. Front/seat/hind Panel -Each
Qty：1pc
F. Ground Stake
Qty：4pcs
ASSEMBLY INSTRUCTIONS
FIG.1
STEPS:
(1)Carefully remove all of the parts from the box and place on a flat surface. Check the Parts
List to make sure all of the parts are included. If there are any plastic covers to protect the end
of metal rod tips, remove the covers before assembly.
(2)Unfold each Side of the Panel (Part #A) and Runner (Part #C) of Sleigh. Insert the rods of the
Panel into the matching holes of the runner;The runners come with metal bars to stabilize the
Sleigh.Attach the bars to the opposite side runner and fasten them with Plastic
ties(Part#E) ,(See FIG.1,2).
(3)Unfold the panel(Part#C),the front panel ,seat panel and hind panel.Insert the rod of the front
panel and hind panel into the holes of the seat panel(See FIG.3);Insert the rods of all panel into
the matching hole at the each side of the Panel(See Fig.4).Insert the wires of the Bow(Part #D)
through the holes of the side of the panel,then twist the wires together.(See FIG.5)
FIG.3
(5) Secure the sculpture to the ground with the Ground stakes (Part # F,See FIG.5).
(6) Plug in.
FIG.2
FIG.4
FIG.5
Advertisement
